RYDLYMEMarine Biodegradable Descaler (4, Gallon Bottle)

this is an amazing product it cleaned my outboards out of the residue from salt and scale.

Product is great. I used it last year for my older Volvo Penta and it worked like a charm. But it is expensive, you pay a high shipping fee on top of that, and then receive it badly packaged. 4 full gallon jugs freely tumbling in a large box, which damaged one of the jugs and spilled the (by definition) foul smelling liquid. Not much was lost, but the box was soaked and I'm glad the package was left outdoors.

The media could not be loaded. I used this on a 90 hp Yamaha 2 stroke and on my twin 200hp Yamahas and it works! Removed lots of deposits and helped resolve my overheating issues. I highly recommend this product to anyone having overheating or as a simple yearly maintenance to clean out the passages on their outboards. Follow instructions on label or view a few YouTube videos to get a better idea of how to use, I diluted mines 1 to 1 and it worked as advertised.

Works great! Flushed for 2-4hours a motor. Before and after of my block sensor. Going to start using periodically as preventative maintenance

I own a 20 year old Honda outboard. It started overheating and I discovered the water jacket was covered in a heavy coat of lime etc. from our lake. I followed directions and flushed the engine for 4 hours. After treatment, I inspected the areas I could access and found them to be totally clean. Placed boat back on the water and no more overheating problem!

I have a 2009 200hp outboard, purchased new, and it has been used exclusively in salt water all this time. It gets flushed once at the end of the season. Flushing every time we used the boat wasn't an option. After 14 years of use, I noticed that it was running hot at lower RPM's, and replacing the impeller made zero difference. I tried products like saltaway with very little success.I purchased a case of Rydlyme and poured it along with 4 gallons of water into a large plastic tub under the engine. I took my small pool cover pump and set it in the tub, and attached it to the flush port. With the engine off, I let it run for four hours, and couldn't believe how dirty the Rydlyme mixture got.Bottom line - this made a huge difference and cured my temperature issue. Running engine temp at 1200 RPM was around 195-200 degrees prior to treatment, and now it's running at 150, like it used to when new.It would have been five stars if buying a case of the stuff wasn't so expensive.

wanna know the serious DETAILS???????type ''DESCALING & ANODE CHANGING YOUR OUTBOARD, FIXING ISSUES'' into youtube, and get the details about REAL descaling of a outboard motor.RYDLYME, AND THE KIT THEY SELL.(DO NOT BUY THE KIT FOR LARGE OUTBOARD USE!! PUMP IS TOO WEAK.)U-S-E Rydlyme as a yearly maintenance. I am!!! It COSTS, But compared to West marine descaler, which barely works, is worth it. Can't speak for others. YOU CAN WATCH RYLYME ''safely'' WORK RIGHT BEFORE YOUR EYES.CLEAN ANODES OFF. T-STATS, IT'S SAFE FOR YOUR OUTBOARD.

This stuff will dissolve any hard to remove organic stain or build up.