CAPMESSO Reusable Vertuo Pod Refill Kit, 2025 Newest Design for Faster Seal Reusable Nespresso Vertuo Pods with Fill & Press Brush,100pcs Aluminum Foil Lids for Refillable Nespresso Pods Vertuo

Brilliant tool with very effective replacement sealing covers allowing reuse of your coffee capsules. Easy and effective way of making your favourite filtered coffee and recycling your used capsules.

Easy to use and happy with the product. Will save me money in the long run

Generally happy, easy to use and better than the previous kit I used. Unfortunately the scoop/tamper was broken when I opened it

This works very well -once you get the hang of it! Once you've used it a few times, it's really easy, I've found it best not to completely fill the pods, just below the top is fine, and don't tamp the coffee down as it needs space for the water to circulate. I did find removing the original thick foil from the pods a bit tricky, but you don't need to be too fussy about leaving a bit around the edge, again, it gets easier once you get the hang of it, the new foil is very sticky so just ensure you press it down firmly over the edge, and it's simple to remove. I now just have 3 or 4 of each size I use regularly, it just takes seconds to refill them. I should save a fair bit of money using these.

This is a really nicely designed kit for filling and reusing Nespresso vertuo pods.There’s a 2-piece holder for filling - the bottom half suspends the empty pod by the rim (so it works with different pod depths) then you place the top funnel half over. Spoon the coffee in, press very lightly with the flat tamp end of the scoop and you’re ready to lid. Simply take the funnel off, line a foil up against the curved guide on the back of the holder, tap into place lightly then put the funnel back on and press to seal.Takes longer to type than to do….I would seriously recommend this version with the funnel - a couple of times at the start I forgot to use the funnel and it’s really difficult not to spill over the pod rim. Also, the rim of the funnel is just the right distance into the pod to leave the tiny gap beneath the foil lid.Used my favourite Lavazzo Cremosa beans on a fine grind in a burr grinder (very slightly finer than for my manual espresso machine) and it makes a coffee far nicer than any of the sample pods which came with the machine. And much cheaper and more environmentally friendly than new pods. (The foils seem to be pure aluminium foil (with a thin line of glue round edge) rather than a plasticised foil like the originals on the pod, so can just put in recycling along with drinks cans / milk bottle foil lids).Haven’t had any issues with leaks, bursts or bypassing water - maybe just lucky with the grind & tamping force I tried; maybe some machines are more tolerant (we got the latissimo). Did have a couple of pods (both original and refilled) which I punctured but didn’t get coffee when learning the machine settings. The machine won’t run on an already punched pod but I just slipped another foil over the top and all was good.Suspect the original pods will have a limited number of re-uses as they are quite lightweight, but even if I get 10 or 20 goes on each that’s still a good saving of both money and resources.

In principle ok. Mixed results with bursts leaking coffee into machine.

Does exactly what we wanted it to do. No more expensive Nespresso pods, no more pods in landfill and we can finally use Illy or Lavazza. Less waste, lest cost and better coffee.

Great kit. Works well and nice firm seal. Arrived a day earlier than expected