sanlida 100% Pure Carbon Arrows, 0.001"/0.003"/0.006", Buy 12 Get 12 Free/Buy 6 Get 6 Free！10 Spines Deflection for Compound Bow & Recurve Bows (12PCS / 24PCS)

So first thing I wanna put out there is I am a certified archery technician. I have been shooting archery since I was 4, tuning my own bow since I was 12, building my own arrows since I was 13, and helping to teach others to shoot and tune their vows since I was 16. I'm in my 40's. I have used many brands of arrows and used essentially every type of material used in arrows (wood, bamboo, aluminum, carbon, fiber glass, and carbon aluminum combined).These arrows are by FAR the best bang for your buck. I purchased the Dragon 10 with the .001 straightness with the red and black vanes and red decal logo. Mine came with the standard all plastic nock, not the pin nock. As many have said those nocks are not the best. They are WAY too tight on both of my bows, a 2018 PSE evolve 35 with ABB (America's Best Bow strings) string and cable set, 2017 PSE Supra target bow with 60x string and cable set. The 60x set has a slightly smaller diameter in the center service so nocks with smaller diameter throats tend to work a little better with the 60x set but the stock nocks on these dragon 10 arrows are way too tight even on the 60x set. So I swapped them out. I purchased some Black Eagle Standard nocks because they had good fit to my strings as well as being the best fit in the arrow shaft of these Dragon 10s in a 300 spine. I also picked up some pin nock bushings and some pin nocks to test out for my target set.I set 12 arrows up for my Evolve 34 since I use that for hunting as well as 3D, and set the other 12 up for the Supra for indoor targt.The straightness of these arrows are great. There's absolutely no wobble in any of these arrows at all. They also are extremely consistent in weight both in the shafts themselves and the inserts and field trips that came with them. The inserts and field tips has 0 deviation in weight. All 24 inserts were exactly 12 grains and all 24, field tips were exactly 100 grains. The shafts themselves only had a max .7 grain difference with the majority of them being 273.3 without the field tip and insert added to them. I had a few (like 3 or 4) at 272.8 and only 2 at 274.00. Now because I have 12 set up for target and 12 setup for hunting/3D those sets have different overall weights. On my hunting/3D set they are currently at a max weight of 410.5 on average with 2 being 410.7 and 1 being 410.3. that's because I added a 25 grain insert weight to the back of those arrows inserts. The target set are currently running at an average weight of 385.3 with 1 at 385.9, 3 being at 385.5 and 1 being at 386.00. so the weight consistency is definitely there and most of the weight differences is due to the insert glue, I'm using the blue Bohning Ferr-L-tite cool flex for carbon shafts so I can work on making any changes if I need to as I get these set for my bows.Now I have seen a few reviews calling these arrows too light. One review specifically called them to light because they were breaking easy. First these aren't really any lighter than say the Gold tip Velocity XT shafts in a 300 spine. The Gold tips Velocity XT 300s run at 8.8 gpi (grains per inch) +/- 2 grains between them and a .003 straightness in a matched set of 6 or 12. These Dragon 10s are running at about the same 8.8 gpi but at a much tighter tolerance being about a 1 grain difference and the .001 straightness between a matches set of 24 (they are available in a set of 12 but the 24 is the better deal). That puts these arrows at almost an equivalent of the Gold Tip Velocity Pro arrows that are 8.8 gpi, .001 straightness and max .5 grain difference between a matched set of 6 or 12. Both set of Gold Tips for a set of 12 pre fletched cost more than $100.00 (not including tax for you state or city) vs these at $99.99 (not included tax for your state or city). So these are definitely not "too light". These issues are most likely caused by the person using the incorrect spine for their setup. Either not using a stiff enough spine for their draw weight, or not using a stiff enough spine for the components used in the arrow causing to much flex. Either way I very highly doubt the shafts are the issue.When it comes to tuning them I haven't had any issues. I paper tune all my shafts. Most online (pro shop) paper tubing guides will tell you to paper tune at 4-6 from the bow. I don't do that. If you tube there your arrow is already starting to correct its flight and any issues you might have may still be present just minimized. I set the paper tuning system up so that my arrow tip is about 1 inch from it. The. I correct any tearing issues I have at that distance. THEN I set the paper tuning system up at 20 yards. I do this because there can be some over compensation in the initial paper tune phase and if so I want to correct that. Once my paper tune is the same at both 1" from the end of the arrow and 20 yards I leave the rest and nocking points where it is and then just sight in the bow. Tuning these arrows has been a breeze. They paper tuned perfectly for their intended set ups.I will be making some minor changes to the arrow builds soon on both sets. They are getting their blazer vanes removed and once the shafts are cleaned they will get a custom arrow wrap I designed added to them and then I will fletch them with the gateway feathers 2" Rayzr fletchings. I like using an actual feather fletching vs a plastic/vinyl vane because wile I might lose a tiny bit of speed I get better overall flight. And yes while they are paper tuned I still prefer feathers over plastic lol.Overall I can't say anything bad about these arrows. I accidentally hit one with another arrow when shooting 5 spot the other day. I forgot what spot I was on and because of the color of bothe the nocks and fletchings I couldn't see my shot placement. I shot at the same spot twice and hit the nock on the 1 arrow. Both the nock and shaft were fine on the arrow I hit. The insert did come out on the arrow that hit the 1st arrow but that was because of the insert glue used. Hitting the other arrow cause the insert to break loose from not having enough glue on it so I lost that in my clubs target wall. I will get it back in August when we replace the target wall so no loss there lol.Now I haven't had these arrows long so I can't fully speak to their longevity. But with what I am seeing now I can't think that they will have any issues lasting if properly taken care of. The only thing that will need to be done is replacing the nocks when you get these. I have seen some peoysay that if you get the ones that have the pin nocks sent you (as they send the nock types randomly) you can't remove them since they are glued in. While they are glued in they can most definitely be removed. Take a lot of water and boil the water. Take the arrow shaft and CAREFULLY put it into the boiling water and with a pair of pliers periodically check to see if the pin nock bushing will start to come out. Do NOT force it. Dip let set for about 45 seconds to a minute and check. If the bushing isn't ready dip again and repeat the process. Just make sure you are careful when removing the pin knock bushings because that carbon can get flexible and you could warp/bend the end of the shaft on the nock end. The insert needs to be pulled straight out, no twisting ore bending to get it to come out faster. Once you have the bushing out it's a good idea to clean the inside of the shaft so use a NEW wire brush cleaning jag for a .270 on the end of a short gun cleaning rod (pistol ones work best) and run the in and out of the shaft while spinning the arrow between your fingers. That will help to remove the vast majority of glue that was left in the shaft. The use a q-tip dipped in some acetone to finish cleaning out the shaft.These arrows are well worth the money. Just make sure you check their spine chart and get the proper spine for your particular setup.

Had these arrows for about a week. Here's my thoughts. The supplied knocks and inserts are meh at best. I replaced them with standard Easton inserts and Easton super nocks. The supplied 100gr field points seem fine.Something to note with these arrows is they are skinny. They sit flush with 9/32" tips and Inserts. When I put 5/16" tips on these shafts there is there is a small lip between the shaft and tip.Another thing to note. On both ends you will want to take a close look for hairline cracks that run off to the ends. I found 6 out of 24 that I needed to recut. By the tip didn't bother me since that is where I cut my arrows anyways. But by the nocks can be dangerous. I had to cut some from the nock side to fix those arrows....and last thing to note. These arrows are liiiight. Roughly about 6.3 gpi. So something to consider if your trying to hit a target hunting arrow weight. I used 150gr insert with 125gr tips. Don't remember what I cut them down to, but roughly a few inches removed. With 3x4" feathers, total arrow weight came out to 495gr.I shoot a recurve 47# at my draw. So the vanes needed to be stripped and refletched with feathers. Had no issues scrapping the glued vanes off with a knife and refleching with feathers.Overall, I'm happy with these so far. They seem to be holding there own against my gold tip and Easton arrows. If anything changes, I'll be sure to update this review.

I purchased 2 boxes of 24 arrows, 48 total. They do seem to be mostly well made but of the 48 total arrows, the insert on 4 of them was very difficult to thread the point into, and three of those 4 would only thread a small amount even with pliers. This inst mis-threading, I think the inserts were installed upside down and the point simply wont seat against the wrong side of the insert.Update on the issue, the company offered me a full refund for the order after sharing photos of the issue with them & have made good on their end.

Bought 24 of these a couple weeks ago. Been shooting them next to Victory arrows which are some of the best on the market.Is there a difference? Yes but only very slightly and the Gragon’s run 50gr lighter. But the difference in price is $21/each vs $4/each.This is also at 60 and 75 yards.Keep in mind these are on the light side compared to my 29” 350 spline Victory’s .Victory: 403grDragon: 355grBoth with 100gr tips.I’ve ordered 150gr tips to see if there’s any improvement with the Dragons.I would recommend going through every arrow and bending them slightly to check for weak spots just to make sure.

UNBELIEVABLE DEAL.Salida is the best thing that has happened for middle-class and poor folks in a long time. These arrows are amazing guys.Not Joking. Weight and Straightness are dead on and even better than some arrows at 3 times the cost. Great deal. They shoot amazingly and are crazy durable. I know it sounds like I am a Sanlida fan-boy. Well, I guess I am. I bought the Dragan X 8 Compound and the Sanlida Hermit X 10 also. All of the products that I have had the opportunity to use have been top-notch. The arrows look amazing and fly great and are more accurate than I am. Visually they are perfect, easy to use, and function great.