165-degree hinge for corner cabinet used to connect cabinet door and cabine body

These are very sturdy and have a soft close. I was also pleasantly surprised by the quick release latch on the hinge, which makes installation easier because you can disconnect the anchor piece and screw into the cabinet frame without dealing with the weight and awkwardness of the door. Then you can separately attach the hinge section to the cabinet door, and easily latch the hinge and attached door onto the anchor on your frame. This means you can also easily disconnect and reconnect the door in the future if you needed to remove it for any reason and without having to unscrew anything.

Works great. Purchased it because whoever installed our cabinets broke one of these. The cabinet kept falling and was misaligned. I easily installed it and it fixed the problem. Extremely durable too.

This was a perfect replacement for my broken DTC-branded hinge, which was marked with the following codes on the back: "HOAQ 21A", "TA35". I didn't have to drill any new holes; the screw positions were identical (approximately 48mm between the two screws around the hinge cup, and approximately 34mm between the two screws on the mounting plate).The product didn't come with any instructions. I'm not sure how you're supposed to figure out bore distance and mounting plate placement for an initial installation, but since I was looking for a direct replacement for a very similar existing hinge, this worked perfectly for me.Time will tell if it's sturdy and reliable. I will try to come back and reduce my rating if it ends up breaking more quickly than what it replaced.

I couldn’t believe I found such a custom product to fix the corner cabinet hinge. You can’t get something like this that actually fits from just any hardware store. But it worked for me. This was a little tricky to install and it did not fit perfectly at first. So I disassembled and used some of the pieces from the old hinge and it fit/worked very well. I can’t say this product is perfect for everybody’s needs since it required some tweaking, but for me it now works and my wife is satisfied. So win-win.

Wow! This saved our cabinet as I searched frantically for this part everywhere and came up short. I searched on Amazon and this came up. It came today and I installed in 5 minutes. I had to drill two new pilot hole but everything else matched up great. Also, this is much better quality hardware than what originally came with the cabinet 4 years ago. I bought a second as a back up. See photo about be as it’s almost an exact match .

Exactamente como la descripción del producto.

I am super happy to have come across this cabinet hinge. About a year ago our hinge broke from our corner cabinet and we had to take the door off. My hubby tried to find a replacement hinge at Home Depot and Lowes but was unsuccessful. They even directed him to cabinet retailer and again, dead end. So the door stayed off the cabinet for a few months until I got tired of seeing it this way. I started researching and came across this product. Let me say, it wasn't easy to open this thing for installation but after reviewing some YouTube videos I finally got it. Yes, little old me was able to install this and took me about 45 minutes. It fits perfectly and is very sturdy. Hubby was totally impressed. Do yourself a favor and don't waste your time making a trip to nowhere until you have tried this :-)

After looking at similar hinges I bought two of these as replacements when one hinge on my bi-fold cabinet doors broke. Bottom line: these worked, the cabinet doors are back in operation, and these were slightly cheaper than other alternatives. On the other hand, they came with no instructions. I had to measure the pieces to determine that each required a 1 3/8" diameter hole cut in the backside of one door, since the old hinges were of a different style without the inset holes; distance from the edge (3/16") was an estimation that turned out OK. Also, the hole has to be just deep enough to seat the hinge, but not so deep as to penetrate the front, so it required careful, incremental depth stops. I have a drill press and the correct type of bits, so it was not difficult, but for someone who isn't familiar with cabinetry or doesn't have the tools (I would not try that with a hand-held drill), this could be a show-stopper. In addition to the missing instructions, only one of the hinges came with screws. A small issue, but again, if the old ones didn't work (they did) and you don't have a box of odd screws, it means a trip to a hardware store. I recommend these if you have some woodworking experience; however, I don't believe they rate "Amazon's Choice" labelling.