S880 NVMe SSD 2TB, PCIe 4.0 M.2 2280 Gaming SSD, Seq. Read Speeds UP to 7300MB/s, Internal Solid State Drive for PS5 Enthusiasts, High End Computing, Gaming

Works fantastic in my PS5. I installed a heat sink with this because it was recommended by Sony. Fast memory and it works just as well as the original built-in drive.

Easy install, and so far, runs great!

It’s been about a month now since I bought this 2tb M.2 SSD to install and increase internal storage on PS5, I so regret not doing this earlier. The install was easy although I suggest watching a few videos on YouTube for assistance, the SSD is lightning fast, comes with full 2TB and I’ve been super happy. I also didn’t install any extra heating as it comes ready to go and again, a month in with no issues as for heat or noise or anything else.

I have had this for almost a month now no issues works great and the best part I did not have to put a heatsink on it. I have a lot more storage on my PS5 know for more games. Oh and it’s fast on my load times too. The price is way better than the other brands too.

I had some trepidation buying an SSD from a company (Fanxiang) I've never heard of but I have heard of very good things about the 3D NAND chips from Yangtze Memory Technologies Corp (YMTC) which is supposedly used in the SSD so I was very interested in trying it out.Wow! I am super impressed! The SSD itself looks just as well made as other better known brands and I appreciated that it came with a tiny screw and screw driver in the kit.I migrated my Dell XPS desktop from a smaller SK Hynix PC801 NVMe 512GB SSD to the larger 2TB Fanxiang S880 SSD. While they both have approximately the same rated speed, my computer actually feels faster with the new Fanxiang.CrystalDiskMark gives the following results:[Read]SEQ 1MiB (Q= 8, T= 1): 7047.477 MB/s [ 6721.0 IOPS] < 1189.05 us>SEQ 1MiB (Q= 1, T= 1): 5063.660 MB/s [ 4829.1 IOPS] < 206.96 us>RND 4KiB (Q= 32, T= 1): 512.761 MB/s [ 125185.8 IOPS] < 247.49 us>RND 4KiB (Q= 1, T= 1): 67.996 MB/s [ 16600.6 IOPS] < 60.12 us>[Write]SEQ 1MiB (Q= 8, T= 1): 6597.671 MB/s [ 6292.0 IOPS] < 1266.55 us>SEQ 1MiB (Q= 1, T= 1): 5464.139 MB/s [ 5211.0 IOPS] < 191.74 us>RND 4KiB (Q= 32, T= 1): 471.844 MB/s [ 115196.3 IOPS] < 277.60 us>RND 4KiB (Q= 1, T= 1): 265.445 MB/s [ 64805.9 IOPS] < 15.35 us>These are very good results for a Gen 4 NVMe SSD. The SSD runs very cool (43 C) and so far, I'm extremely happy with my purchase. It has been running flawlessly in my computer and I hope that it will remain reliable in the long term.I am now a big fan of Fanxiang and will be using their products when I upgrade my other computers. It's always exciting when I discover a new brand that I like.

These comments were written in July 2023 and apply to the4TB S880 NVME drive purchased from LDCEMS and shipped from Amazon.The 4TB drive is single-sided. The drive has a Maxio MAP1602A controllerand YMTC 232L (X3-9070) TLC NAND running, presumably, at 2400 MT/s.CrystalDiskInfo shows that the device standard is NVME 2.0.CrystalDiskMark 8.0.4 x64 reports:SEQ1M Q8T1: 7125.57 MB/s (r), 6511.03 MB/s (w)SEQ128K Q32T1: 7117.04 MB/s (r), 6460.51 MB/s (w)RND4K Q32T16: 3816.99 MB/s (r), 4208.21 MB/s (w)RND4K Q1T1: 73.99 MB/s (r), 334.87 MB/s (w)The sustained write speed was approximately 1.8 GB/s until the drivegot to about 45% full, at which point the write speed dropped toapproximately 0.8 GB/s until the drive was full.The temperature according to CrystalDiskInfo always remainsbelow a cool 49 degrees Centigrade, even under sustained writesthat filled up the drive. This was using a motherboard heatsink.No throttling was observed.Maxio NVME SSD fid v0.33a says:v0.33aOS: 10.0 build 22621Drive : 7(NVME)Scsi : 8Driver : W10Model : Fanxiang S880 4TBFw : SN12237HMB : 40960 - 40960 KB (Enabled, 40 M)Size : 3815447 MB [4000.8 GB]LBA Size: 512AdminCmd: 0x00 0x01 0x02 0x04 0x05 0x06 0x08 0x090x0A 0x0C 0x10 0x11 0x14 0x80 0x81 0x820x84 0xC1 0xC2 0xC5 0xC6 0xFCI/O Cmd : 0x00 0x01 0x02 0x04 0x05 0x08 0x09 0x80Firmware id string[0C0] : MKSSD_101000000122373100,May 22 2023,14:26:20,MAP1602,1SSYBB5CProject id string[080] : r:/Congming_Hao/MAP1602-X3-9070-4T-SN11853-Base-SN12237Controller : MAP1602NAND string : CYAxxTE1B1xC3BList may not be completeCh0CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieCh1CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieCh2CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieCh3CE0: 0x9b,0xc6,0x59,0x71,0x30,0x0,0x0 - YMTC 3dv4 TLC 16k 2048Gb/CE 1024Gb/dieApparently, Maxio fid v0.33a does not know the full interpretation of these bytes,which seems to be:0x9b,0xc6,0x59,0x71,0x30,0x0,0x0,0x0 -YMTC 3dv4-232L(X3-9070) TLC 16k 2048Gb/CE 1024Gb/die 6Plane/die>