Adam’s Mega Foam (16oz) - pH Neutral Car Soap For Car Washing, Concentated For Wash Bucket, Foam Gun, Won't Strip Car Wax or Ceramic Coatings

First off, the amount of foam you’ll get depends a LOT on the equipment you’re using. In my case, I swap back and forth between an Active 2.0 with an MJJC Pro 2 foam cannon during the summer (one of the best setups for foam) and a Ryobi 40v 1500psi 1.2gpm pressure washer with an Astro foam cannon in the winter (lower end of flow for good foam). With the Ryobi, using a 1.1 orifice in the foam cannon, it does a good job and definitely gets the job done. The Active with a 1.25 orifice is a different story, and the extra GPM is definitely noticeable in the thickness and amount of foam generated from the same amount of soap. Now for the soap review itself. It smells nice, lubricates well, and overall does a great job. I’m using it with a deionizer, but they also claim it’s direct sun safe and won’t contribute to water spots. With the right pressure washer/foam cannon setup, you can easily get that super thick, clingy, shaving cream type foam that some of us enjoy (myself included). I personally do the foam/rinse/foam+contact wash method and this is a great soap for that method. Is it my favorite soap? It’s a very close race between Adam’s Mega Foam and CarPro Reset. You can’t go wrong with either.

Love the cherry smell. Works good in the foam gun. Car seems cleaner than before so I don't know what else to say about it. It's not the cheapest product and not the most expensive. I'd buy it again (and have)

I am really impressed with Adam's Mega Foam. I recently bought a foam blaster to wash my car. I filled up the foam blaster with water and added about 2oz of Mega Foam. I attached the foam blaster to my pressure washer and then started washing my car. It produced a thick foam that stayed on the car. I didn't start dripping off the car. After spraying the whole car with foam, I then used a microfiber wash mitt to clean the car. The foam and wash mitt made it very easy to clean my car. This is an excellent product and I can see why many car detailers on YouTube recommend it. Also, it smells like bubble gum which is another plus.

So far so good, put 2 ounces in my foam gun and filled up 3/4 of the way. I should have filled completely, but it foams well. I'm not sure how many washes a pro can do, but for this monthly guy, it should last a while.

Does exactly as it says. A little goes a long way and it smells good imo. I wish the had a product that foamed like this but had a little more bite to it kinda like carpro reset. Overall I use this all the time and will probably buy the gallon size next to keep on hand.

This stuff is amazing. Not only does it work well it smells good also

Update 4/2/2021: decided to give it a 5-star after fiddling around with mixture and adding other cleaning agents with it in the same bottle. The result was far better than I expected. It's makes a great shampoo to carry a more aggressive cleaning agents into the foam. I like it so much that I ended buying a whole gallon for just a pre-wash stage. Pros: Foams great Easy to mix and not very thick solution to work with Easy to mix and doesn't require a lot of soap to start the foaming Smells like bubblegum Cleans well and noticeable contaminants in the foam. Cons: Pricy for just foaming stage Not very slick to provide confidence in a contact wash Foam looks thick but is quite thin on texture compared to honeydew and hyper wash. Bottom line, this is a good pre-wash soap but the price for a gallon is hefty so I chose to get a small bottle to test.

This stuff is no joke. Mega foam rocks. I searched for quite awhile for some good foam cannon soap. My previous soap, detailers pro, didn’t foam very much in my mtm foam cannon. It was bw this and a few chemical guys options. So glad I chose this. The scent is awesome, and the foam is unreal. It clung to the vehicle no matter how much I sprayed. It held on for at least 5-10 minutes. Made washing my wife’s bronco virtually effortless. The pics speak for themselves. Don’t hesitate, just buy it.

I bought this soap purely as a prewash that would cling onto the car's surface before a contact wash and here are some things I've found out using it. It has a very low viscosity compared to for example Adams Car Shampoo. This makes it easier to mix with water but just because it's runny doesn't mean it's not strong and concentrated. Also, reviews say this soap smells like bubblegum however I find the smell to be comparable to a mild cherry cough syrup. My setup using this product was a Karcher K1700 pressure washer, MATCC foam cannon with a 1.1mm orifice and the dilution ratio I used was 1:16. Upon first use I was very impressed with the amount of foam it produced but even more so with how well it clings to the car, even with a wax coating on it! The smell like many other soaps when mixed with water was very mild and not very noticeable when using. Some things to know about this product are that it is Ph neutral at about 7 from a few reviews I've watched. This soap won't lubricate as well as some other soap which is why I only reccomend using this as a prewash. When using a 1:16 ration you are able to create the same amount of foam as using a cheaper soap with a 1:8 ratio which will save you money in the long term by using less product. Lastly just have some fun! In my opinion foam cannons are worth it regardless if it helps prevent scratches due the nature that it it's just fun changing a car's colour with foam.

Makes nice and thick foam and smells really awesome.

Exactly what is says it does

Excelente producto lo compré para probar y quede mas que satisfecho con el resultado, anteriormente usaba foams de chemical guys u otras marcas pero nada comparado con este si nivel de espuma es excelente usándolo con un cañón MJJC. Sin duda lo seguiré adquiriendo

Nice