FLASHFORGE ASA Filament 1.75mm, 3D Printer Filaments 1kg Spool-Dimensional Accuracy +/- 0.02mm, no Smoke and no Odor (Black, ASA)

Really good filament, strong when printed, nice colour. Printed perfectly on my Bambu P1S with the "Generic ASA" preset. Fully recommend

This is by far the best ASA filament that I have used. The black is true black unlike some other brands that are a dark grey. I really am very impressed with this filament, it comes off the spool with ease, and the print quality is excellent. To get the best out of ASA I typically print at slightly higher temperatures than those that are recommended and use hardly any cooling. My printer is a Flashforge Adventurer 5M pro and is fully enclosed. For the money, this filament is excellent value and I will definitely be making this my preferred choice from now on.

This has become my go to filament for most things I print. Copes well with temperatures in car engine bays and not had any structural prints break apart from when I deliberately did so for testing. I do get a bit of warping off the bed when I print over 200x200 but I think that may be my fault for not having the chamber heater on. Overall, can't recommend this ASA enough.

This is the only ASA I've used, so I can't compare it to others. I bought it mainly because it was the cheapest available at the time from a brand id at least heard of. It prints great, really wasn't difficult at all to get good prints with; however, it DOES have an odour which is quite strong, mainly noticeable when I open the door to take out the finished print, it does smell during printing, however, nowhere near as strong. Prints are quality, super strong, and clean. Already bought again as I ran out and have more to print! Info - Bambu Labs P1S, Smooth plate 100 °C, 260 °C, dried for 12h @55c, why printing in 30 °C dry box, 20mm brim, max print speed 250, filament is calibrated for flow rate, flow dynamics, overhang angle and temps

Excellent product but needs high temperature enclosure and bed to print. It won't print on something like an bambu a1. This is not a fault no asa will print on an A1

Known brand at a good price have used it before and is easy enough to use without issues

With default ASA settings (nozzle 260C, bed 105C), as indicated on the product's label, the material exhibits poor adhesion between layers and the resulting piece broke with minor stretching. Tested on Prusa i3-mk3s. I will test again and again, and update my review in case I find settings for better quality prints but, for now, I cannot recommend this filament.

ASA can be highly toxic material to print with inside etc. flashforge sell this under the same ad on Amazon which means people presume they’re buying a safe product but are purchasing something that requires ventilation etc and cannot really be printed inside. The ad contains only images for PLA and no description or warnings about ASA. I’m returning mine as soon as it arrives, Amazon should not be allowing this mix of different material types with no warnings etc. be careful what you buy, I clearly didn’t read properly and presumed I bought something else.

Print goed en ziet er uitstekend uit. Uit de verpakking gehaald en gedroogd in Polydryer voordat ik het heb gebruikt. Ik heb een Bambu P1S. Instelling: Generic ASA. Shrinkage gemeten: X-as 99.44% en Y-as 99.56%. Gemiddelde shrinkage 99.50%.

Le matériau est de bonne qualité, mais le fil est mal enroulé sur la bobine, ce qui provoque des blocages. C’est vraiment dommage.

Lagre prints works best. Overhangs is a problem as many have mentioned. I would buy a diffrent asa next time

Easy to use, the recommended settings were accurate and it printed well right away. It prints better than the poly maker stuff I was using. No lifting no uneven extrusion. As you can see in the pic the parts look great :) I would definitely recommend this ASA and will buy it again. More colours would be nice but I mostly use black and white anyways.

Catastrophic bed adhesion. On a Voron 2.4 with textured PEI bed... I will stick to ABS