KAFAHOM Power Tool Organizer-8 Drill Holder Wall Mount,4 Layer Heavy Duty Metal Power Tool Storage Rack,Garage Tool Organizer and Storage with Screwdriver Holder/Plier Holder/Hammer Holder

The weird photos Mae this seem bigger than it really is. Definitely measure your needs and space. Outside of the weird photo it is a great rack and perfect organizing my gear in a small space. Assemble was quick and it hold all my tools plus my bits, saws and a few other things. A few dry wall anchors keeps everything securely in the rack. I was going to DIY my own but for the cost, this thing saved me time and looks great.

So that I don't bury the lead, I'm very impressed with this shelf! It's well built, semi-configurable, and very sturdy. I'm reviewing the 3 shelf unit including the bottom wire rack, not the 4 shelf unit. I did quite a bit of research on these shelves before pulling the trigger trying to compare features and components for what would work best for me. I scrubbed through reviews and despite the disparaging reviews for this unit, it really is well built and made of decent quality materials. This unit was on sale for 39.99 and was the cheapest of the units I was comparing. I was a bit concerned about this one because some of the other 32" wide shelves seemed to have a support in the middle for extra weight whereas this one didn't. I don't plan on climbing on it or anything, but I did not want it to sag as some of the reviews mentioned. I was pleasantly surprised with this because the bottom wire rack shelf came in two halves with a channel shaped support in the middle to prevent it from sagging. And it's sturdy so my only fear was thankfully not an issue. The middle and upper shelves are hinged so when they swing open the hinges are beneath the shelves. This takes up a bit of room on the underside (about 1/2" in the center) but it does help prevent them from sagging with additional weight. I plan on just having the bare tools on it so weight should not be much of a problem. Another thing I liked about this unit is that the top shelf was more solid than just a series of wire/bars going across like the bottom shelf. There are some slots but nothing wide open. They are small enough that nails/screws/nuts won't fall through if they spill on it. What I did not find in the reviews or the description was the height of the middle shelf. [It can vary from 6 3/4 inches to 7 3/4 inches and I'll explain below.] The descriptions give overall height and depth dimensions, distance between the wires to hold the hanging drills (which include room for most batteries if attached), but not the interior of the middle shelf (or shelves on the 4 rack unit). The reason that the shelf height can vary is because the assembly can be altered a bit. The frames of the shelves are made of 1/2" x 1/2" square tubing with holes drilled for the attaching screws. This means that each shelf can be individually mounted above or below the support cross brace on the outside ends. If the top shelf is mounted on top and the bottom shelf is mounted below that gives you an extra inch of space in the middle shelf. That and the attachment holders [the screwdriver/hammer/pliers holders] can be swapped around (above or below the supports) as well giving an additional almost 1/8" for two of them. I also liked that the holders' screw holes were universal so they could be rearranged to fit my needs as well. A note on the installation hardware, the package came with 1/4Φ x 1 1/2" expansion anchors for mounting in either concrete or cinder block walls and 1/4 Φ x 1 1/2 drywall anchors with screws for mounting into drywall or preferably into the studs in a wall. I have the unit assembled, but have not gotten it installed in my garage yet. I'll come back and add any additional details once I put it to good use.

Very sturdy well designed rack. Of the models I've seen, this is the sturdiest. Most notable is the heavy gauge middle support that greatly increases overall rigidity. Other models with a hinge in the middle are much less rigid. The overall fit and finish could be better, but this is very usable and the best I've found. Price is a bit high at $50.

So this is a very neat product. Assembles in about 5 minutes, installs in another 5. The anchors are crap but I've got plenty of the right ones. Once installed it's very solid and stable. It my place for Ryobi and everything fits fine. I had to run a strip near it and plugged in there while chargers are on top shelf. Great for my needs, price was right too.

I love the tool rack and highly recommend it to anyone who wants their power tools, batteries and chargers organized rather than sitting around all over the place. It is sturdy, has lots of room for your power tools and storage and came with nice mounting hardware. The one real issue I found is that the 3 mounting holes are 14 1/2" inch on center....while the standard spacing for wall studs in most US homes is 16" on center. For something rated to hold this much weight I don't like to use drywall anchors simply because I have had them fail to many times. This left me with the option of mounting wood boards to the studs, then mounting the tool holder to the boards or mounting the center hole to the center stud and using 2 long screws at an angle on the ends to catch the outside studs. This is what I chose to do for now. (you could also mount the center hole to a stud and use drywall anchors on each end if you trust them) Would love to see this same rack with the holes spaced 16” on center! Please note I purchased this product with my own money and have no affiliation with those who make or sell it.

Great!!! Would buy again!

This is an excellent item for organizing power tools and batteries. It is well built and easy to assemble and install.

Works great

The quality of the product is very poor. Not worth what they are advertising for. Its like a scam.

Good quality and drills fit perfectly.

Necesitaba un espacio mas adecuado para guardar y colocar las herramientas inalámbricas y sus accesorios. Este espacio es ideal. Viene completamente desarmado y es necesario ensamble. No es complicado, puede tomar alrededor de 1 hora ensamblarlo y colocarlo en pared. Una vez ensamblado el acabado y rigidez es impresionante. El espacio es adecuado para multiples cargadores y muchas herramientas.

Awesome for my DeWalt tools in very stable

An absolute Temu POS. I came back to view the photo in the ad and came to the conclusion the oil containers and toolboxes they put into the racks must be Temu purchased as no normal sized component boxes or other workshop items will fit. I could fit some toilet paper. Also the rawl bolts that came with it was absolute crap. Had to use my own proper bolts in the end. Total waste of money. Stay away unless you just need 3 small shelves and want to pay top dollar for it.