JUSMO LS15 Pro Camera Desk Mount, Aluminum Overhead Camera Mount Rig, Table Multi-Device Pole to Mount Magic Arm Clamp, DSLR, Cameras, Phone, Light, Microphone, Streaming, Studio, Max Load 22 lb

I obtained two camera mount rigs because I knew I would require additional parts. A normal assembly would clamp the vertical part on the left and right side of a table and attach a long pole between. In my situation, only the left side of a steel table would accept the clamps. I clamped one vertical part on the front of the left side. On the right side, I placed a pole vertically with the flat end down on the table. A long pole attached the two together. I clamped a second vertical part on the back of the left side. At a higher elevation, a long pole attached the rear vertical part to the right pole. From above, this rig would look like a letter V. To increase stability, I added a magnetic base to the right vertical pole. This was made by attaching a hex coupler for 5/16 inch threaded rods with a hex bolt to a 3 inch diameter round base magnet (Harbor Freight Item 96650). I inserted the coupler into the hole at the base of the vertical pole and held it in place with the pole’s setscrew. When the magnet was placed on the steel table the rig was very stable. I can adjust the front pole to the height I require. I put a fence post level, shaped like two adjacent sides of a cube, along the long pole to level it. It would stay balanced on the pole which allowed me to have my hands free to make adjustments. I initially had a problem with the clamp that is used to hold a camera. For a while, the camera would move out of position. I do now know the reason for this problem. I was able to adapt the rigs to my situation and it functions very well.

wow! I'm amazed at how durable, function, versatile, and at a great value this overhead camera rig is at the price point!! for starters, I'm a 20 year YouTube vet and I've had many setups that never really cut it. this is sturdy af and the design makes it easy for you to add multiple cameras, mounts, lights etc.. the only minor con I have for this unit is the desk compatibility. you need to make sure your desk has the proper length and has the right ends to clip it together. I figure out a work around for desk that have awkward corners but be warned!! If your desk has corners with fixtures that aren't the same length as the clamps. you're in for a bad day.

I have been looking for something like this for a while now, and this rig answered and alleviated all of my issues. I now have a place to hang my lights, cameras, wires, video monitors and more. Very sturdy, low profile and out of the way. Definitely impressed with this product

I utilized this camera mount for a project recently. It worked great in that it came with a mount I could use for holding a projector up, it is sturdy, and it holds up well. It is pretty customizable for various sizes as you can adjust how many bars you use for the sides and the top bar. It comes with a little tool to tighten set screws to better hold the pieces together but you just need to initially screw them in as one end is setup to accept the other. I do wish it was easier to purchase additional bars to further customize if you're making it wider. In addition the clamp mechanism while it works rather well can be difficult to utilize on some tables. I printed out 3D printed shims to use to attach to a table more securely for this case but for many tables it works well just as is.

This is amazing for filming my YouTube channel Spacytracy Nails. I just got a adjustable desk and this is the best setup because when the desk shakes the camera is going at the sometime, Being that I do nail art this makes my videos look amazing even when the desk shakes. If you are looking to buy this don't think twice you will not regret it. You can adjust it no matter what size your work space is if you are filming for any reason. This has multiple poles and many different ways to add to the over head setup. It only takes like 15 mins to setup and extremely easy to use.

This rig has transformed my desk. I have an overhead camera, 2 Elgato Key Light Air, and 2 Klipsch Pro Media speakers mounted to it. Having all of those things and their associated mounts removed from my desk has left me with an amazing amount of open space on my desk! It is very sturdy as well. Sure, it has a little wobble if you intentionally shove your desk. But from regular typing and mouse movements, it doesn't have any perceivable wobble.

I've been searching for a way to convert my vintage printed patterns into a digital format for a long time. The pattern paper is too delicate to run through a large-format scanner, and nothing else I tried was practical. I found this neat rig, got the camera mount, and took straight photos of the pattern pieces on my sewing table. I still had do do some editing of the photos to correct the lens distortion, but it was a far cry better than anything else I'd tried, and resulted in a usable pattern that I could scale down or project from a projector. Now I just need to get the little lights to light the surface more evenly. Tip to anyone else who wants to use this for getting patterns into digital format: take a control photo of your gridded cutting mat on the table first, then shoot the pattern pieces on top of that without moving the mat or the camera. If you use Photoshop or similar programs, you can use that first photo as your control from which you correct size or distortion. Any changes you make to the control photo, make to all the others exactly. Make sure to take a new control photo for each session; gravity will make your camera's position shift even if you leave it in the mount and tighten everything. I'm very happy with this item, it's provided to a solution to a long-standing problem.

Rigidity of this mount is great. That’s most important for this purchase. I also liked that this is one of the few that fit my 6ft wide desk and provided enough height at the same time. This product also had one of the deepest mounts at 4” deep. I purchased the bundle offered with the jusmo Ls04 and it doesn’t even fit this mount. Why are they offering it as a bundle?

Lo súper recomiendo. Excelente para grabar y fotografiar

This is genuinely one of the best purchased I've made in a VERY long time. I was worried the kit wouldn't fit my desk (IKEA Bekant 43"), but it did. - I used all the rods, but that's only because I wanted my top-down camera to be a little higher, I could have spared a couple, which is crazy to me. It's very sturdy, and was really easy to setup. The clamp it comes with is very strong, and is holding a mirrorless camera without any issues. It'll only be as sturdy as your desk though, so make sure you're on a level surface or you will get some shake. - that being said, no issues here and I'm very happy with the end result. This will help increase my workflow so so much, and was such a good investment.

J'ai tout reçu et bien emballé . Le montage est facile et adaptable a plein d'idée. J'ai acheter d'autres pinces pour mes autres lumières. Je vais mettre ma nouvelle chaine YouTube en ligne bientôt. Et se kit en vaut vraiment l'achat. Solide sur ma table a dessin inclinée. Et je gagne de l'espace car pas sur ma table. et ma table mesure 38 pouces et les barres du haut sont assez adaptable. Je n'ai pris que 2 barres pour la hauteur, donc avec l'ajout de pinces acheter a par plus. J'ai une barre de plus pour mettre une autre caméra en angle pour un autre point de vue. Je recommande car elle est solide, s'adapte bien aux pinces acheter en surplus. Tres bon produit et le vendeur tout était bien emballé . Fidèle a la description. Je vais mettre le lien sur ma chaine YouTube de se magnifique produit que me facilite la vie. Ouverture bientôt .. je nom n'est pas choisis encore... d'ici décembre . Merci ...

I'm a full-time fine artist and illustrator, who's started to table more often at public events this year. I use these for my table displays when selling my art at conventions and markets, etc. to display my prints and stickers. I started with a cube-grid display, which was great, but very heavy, and super time-consuming, so I pivoted to these last month, and it's been a game changer already. The Good: * Very sturdy. Doesn't wobble, bow under it's own weight, or threaten to collapse as a 5' tall rig (my first attempt with the cheaper NEER version was a disaster). * Easy to set up alone. I often set it up on a 6'x2' table (4 sets needed for my display), and it's nowhere near as dificult or time consuming as my first load-out. * Quite light-weight, so it's very manageable for me to transport when I'm tabling solo. * Good accessories/grip design The clamp for camera mount is really great (I use it on another set I have set up in studio over my drafting table to film process vids). It stays put, and I'm never nervous about it sliding or giving out when my camera is attached. Also, the brackets fo the cross-pole are wonderful, and hold on tight with minimal torquing, so I'm never worried about stripping the screws just to make it stay put. They also easily support the weight of my print display, and don't slide or shift at all. The "bad" / warning: * Tiny bits easy to lose, may be hard to replace The little lock-screw things to secure the poles in place after they've been screwed together are very easy to accidentally spin right out of the pole and lose. No replacements are provided, and I've been unsuccessful so far finding options (for the inevitable event I lose them) :( Admittedly, this is only really a factor if you're using this stand the way I am (setting it up and taking it down multiple times in different places) - if you're looking to set it up in a studio space or something similar, it isn't as much of an issue. * No carry-case included. Again, more a me problem in using it as a portable display, instead of a more studio-based approach. *Price for additional poles This one is a bit of a sore spot - two extra pole sections (purchased separately) are nearly HALF the cost of the entire rig, with the clamps, brackets and so on included (at the time of this review, they're $55cad before tax, etc). Which really sucks, honestly - I don't understand that bit at all, and it feels a bit predatory :( Overall, the quality is wonderful, and this setup will likely last me a good long while, but the lock-screw situation, and the weirdly prohibitive cost of additional pole sections may give some people pause.

I'm thoroughly impressed with the sturdiness and flexibility of this product, especially considering the price. It's an excellent value for a table overhead camera mount. I absolutely love it. I had 2 and assembled 1 huge one for my studio downstairs and another smaller rig for a smaller desk in my office.