Meguiar's Pro Speed Compound M10032 - Fast-Cutting Compound for Heavy Scratch and Swirl Removal - Professional Car Polish - Compound That Removes up to 1200 Grit Sanding Marks, 32 Oz

This Meguiar’s Pro Speed Compound works extremely well for removing scratches, swirl marks, and oxidation. It cuts fast and delivers noticeable results with minimal effort. The finish looks smooth and glossy after use. Easy to apply and great for both professional and DIY detailing. Excellent performance and value for the price. Highly recommended.

A body shop recommended I try this to remove rust stains on my paint...stains have been there for years due to my lumber rack dripping rusty water. This product knocked out the stains in a matter of 1-2 minutes. Great product!!!

Works amazing removes everything scratches

once I figured out to slow down the speed and let it do it's work it became easy. it does a decent job removing swirls. it left a few 1500 grit marks. I decided to cut again with 1500 then 2000, then 3000 and zero marks were left. foolishly I assumed I could do a whole car in under 2hr before I started. this job was 6-8hrs. I'm not mad at all since I learned a lot from it. trusted brand at a good price fit the size

Only use it for a couple days but seems really good! Man is it easy to wipe off 👍🏼

If you're looking for a product that works will with 3M pads, costs much less than the over-hyped European counterparts and removes the haze left from sanding, this is it! This is the only product I've found that removes 100% of the haze with only a few passes and works well as a 1-step polish. For my use, I'm using it to remove the haze left by 3M's Trizact 1500 then 3000 pads and with their white compounding pad. I first tried Sonax's Cutmax, which is a step below M105. Both of those products only get rid of ~75% of the haze after sanding. I also tried Menzerna's Super Heavy Cut 300 compound and that gets rid of about 90-95% of the haze after several passes with a good amount of pressure. Haze was still visible when inspecting under direct light, especially on curved panels where heavy pressure or high buffing speed is dangerous. With Meguiar's M100, I can do about 2 quick passes at medium speed and all the haze is gone, leaving a finish that's good enough to call 'show car' quality. The M100 also worked great on plastic bumpers at a low speed where using the other product made no noticeable difference. This will definitely by my go to compound going forward! That said, this compound might be too aggressive for doing a light correction for swirls or car wash scratches. If you use this as an all-in-one compound for light correction work, I'd recommend a less aggressive pad and low pressure.

As advertised

Tried this product on my work van, and was very impressed how it was able to remove minor scratches even a few semi deep scratches. Would highly recommend this product for minor scratches it works very well. I bought Meguiar's G3500 DA power system tool and incorporated it with my detailing and it worked really well. For best results use all three components the compound the M100 mirror Glaze Pro Speed, then use Meguiar's M205 Mirror Glaze Ultra Finishing, finally a good car wax. Its a lot of work, but its worth it cause it leaves your car looking all most new, so called mirror shine. Oh almost forgot in between applications make sure you buff really well, and constantly replace cotton polishing pads on your buffing machine. I have a 2012 Nissan NV HighTop 2500 it took me over a 3 day period to do both sides back and the hood, still haven't done the roof of van. Probably 15 hours over that 3 day period. In essence your waxing your vehicle 3 times with the 3 different components removing and buffing in between applications, that's why it takes so long to do. Hope this has been helpful.