Cooler Master HAF 700 EVO E-ATX High Airflow PC Case, IRIS Customizable LCD .Breathable TG Front Panel, 200mm Sickleflow Fans, 1 x USB 3.2 gen 2 Type C, 4 x USB 3.2 gen 1 (3.0) (H700E-IGNN-S00)

I'm NOT a fan-boy or a paid shill. I'm just a guy that likes to build computers. I was searching for an extremely large case for a water cooling build with a full size E-ATX (12"x13") server motherboard (SSI-EEB) I had already purchased 2 large format cases and returned them both due to poor engineering and design. (TT Tower 500 and a Cougar) After 2 failures in a row, I bought this CoolerMaster 700 HAF with a good bit of anxiety.I'm absolutely amazed.The first thing that stood out was they actually put thought into removing this behemoth from the packaging box. It's big, bulky, and very heavy. You can't simply slice open the top of the box and yank it out of there. It's a beast. CoolerMaster (CM) designed the box with 4 little squeeze tabs at the base. You slice the top tape and then pinch to remove each of the 4 little squeeze tabs around the base of the box. Then you simply slide the box up and away from your new case. Talk about EASY!!The next thing that shocked me was how easy it was to remove both side panels. There is a single thumb screw in the back of the case, at the top. You remove that with your fingers, and then slide the top part back about 1 inch. The side doors pop off with a gentle tug and the entire top comes off if you slide it all the way back and lift up. At that point, the case is wide open for your build. No tools!! The top part is held in with the thumb screw and the doors snap into place with metal clips in the case. The side doors go back on just as easily.As I said earlier, I'm building a massive server board with a bunch of water cooling. I'll have (5) radiators in this thing and it will hold them ALL. It has room for dual 480mm rads on the top and a 360 rad in the front as well as the bottom. It also has clear room for a 240mm in the back and I think I could stuff a couple tall skinny rads here and there. It has room for at least 3 good size pump/res combos or plenty of room if you wanted to separate those parts out and hang your reservoirs up high with pumps spread across the floor. You could get 4 pumps on the floor easily..... and that's just the front side. It has brackets for mounting your pumps and reservoirs too. They remove with a simple twist of the thumb lock. No tools.It's a massive case and built for anything you can throw at it. As such, it comes with a giant rack for your HDD. I'm not using those at all so I don't need this rack. I'm using dual NVME on the MB for my OS, and quad 2.5" SSD for storage. I wanted the HDD space to mount a pump/res combo. It comes completely out with a simple thumb press on a metal tab!! 2 seconds and it's out. No tools! Giant hole for almost any other type of hardware you can imagine. Awesome.CM includes a single 360mm radiator bracket. It's in the bottom of the case but removes with a simple twist of a thumb tab. Again, tool-less removal and installation. I got to looking around inside the case and discovered that if you don't want that 360mm radiator on the floor of the case, you can flip it over and mount it into the top or the left side!! (maybe you want pumps and reservoirs down there?) How cool is that?!?! They made the case with the right slots and tabs so that you could move the 360mm radiator bracket into any of 3 different positions inside the case.It does come with 5 fans. There are (3) 120mm fans (back and rad bracket) and (2) of their 200mm fans in the front. It does come with 2 different RGB/PWM control boards. I'm not sure how that will work with my SSI-EEB server MB since I don't have RGB headers. I do want to try and work with it, but I'm prepared to rip it all out and replace with a Razer system. I'll have to wait and see what happens when I get that far into the build. It DOES have the stuff in there if your MB is compatible.It also comes with a plastic case for the included hardware, and there's a LOT of it.I'm just super impressed. It's clear to me that CoolerMaster actually put thought into the design. It's all modular. It all makes sense. Stuff lines up and is put together in a logical manner. 5 stars across the board. Way to go CoolerMaster!!!

Out of the many cases I've worked in this one was easily in the top 5 for easiest to cable manage and fit all the parts into, not sure about if the extra fan helps but the two 200mm fans in the front do a lot of heavy lifting for airflow. got this in a combo with 650w PSU and CPU cooler for 150$ on sale and for that price this is hard to beat.

I have always liked HAF cases and this one is by far my favorite amongst them.Tons of cooling options and an awesome front panel with some of the best RGB lights I have seen, the small round screen is great for showing all kind of PC related info and optionally gifs or still pictures, it does lag with gifs though, a 10 second animation might take twice the time to show.The case is roomy inside although it might still be unable to accommodate very thick GPU cards from previous generations. The HDD compartment behind the motherboard is nice but gets a bit hotter than the rest of the case, it could use some dedicated cooling.

Muy buen producto

This was my third PC build and I absolutely love it but I wouldn't recommend this to anyone who isn't confident in their ability, I ran into many issues with this casestarting off the back panel did not align with my MOBO requiring me to remove it to install the heatsink, so I would check your MOBO dimensions before decidingsecond the appropriate screws on the left radiator wing did not properly secure and I had to use thumbscrews this sounds minor and it is, but I expect better from CM and there's no reason for this to be the case. perhaps I am unlucky but it does accurately reflect my experience so i'm going to leave it inmy initial plan was to have the rad behind the wings and the fans in front but the rads I bought didn't quite clear the top of the wings so I had to put both in front, this unfortunately means that I have limited access to my GPU's display ports because the cords are blocked by my fans, I would think with how ubiquitous radiator designs are they could have taken this into accountsimilarly the bracket meant to secure your GPU might possibly block your I/0 ports on your MOBO or outright prevent you from installing your MOBO, they provide to sets of holes to secure it and fortunately the lower most set is just underneath my MOBOthese are things that are both my fault for not properly researching and poor design on CM's part both can be true at the same timesomething also to note it is very heavy, and with very few ways to comfortably hold it, and if the screws securing your rad/fan wings are loose they will fall off while moving itall that said I do love this case its very unique and a great choice for a custom loop

Wow!! One of the best cases I've had in awhile. Fits a 4090 with no problem. It is light weight. My son has the black version, but I've always used white builds, so that is why I went with this one. The side panel has one finger screw on the back and then it just pops out from the top, so easy to get into it. I used the Cooler Master 360 Core II White AIO CPU Liquid Cooler with it and it all works great together. Case temps are staying very low, so it seems to have very good airflow. Overall a great case for a mid tower.

This case is absolutely massive in the best way. The HAF 700 EVO gives you so much space for airflow, cable management, and future expansion. I'm still in awe of how solid and premium it feels. Cooler Master really nailed the design and cooling options — and the ARGB setup looks stunning. It’s a serious chassis for serious builds.