The signal terminal needs to be input with one 50 HZ square wave, then the duration of high level pulse, which is used to control signal cycle, can control speed and forward/backward rotation as well as stalling. The duration of high level corresponds to a speed. When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is the fastest when it is 1ms, the higher the lower, servo will stop rotating when reaching 1.5ms). When high level is 1.5 ~2ms, the servo rotates backward(The servo stops rotating when reaching 1.5ms, when the duration is closer to 2ms, the closer, the faster. The backward rotation speed, the fastest when reaching 2ms) This servo carries meso-position adjustment potentiometer(it can only be seen by peeling off the outer cover and circuit board). We can set high level pulse at 1.5ms to observe that whether servo stops rotating. If it doesn't stop rotating, we keep adjusting the potentiometer until it does. Features: Applies to model airplane / Model car / robot Torque: 5.5kg/cm (at 4.8V) Speed: 0.22sec/60°(at 4.8V) Working voltage: 4.8v-6v DC Temperature: 0℃-60℃ Current: < 1000mA Weight: 38g Dimensions: 1.57 x 1.61 x 0.78 inches (4 x 2 x 4 cm) Package include: 1 x 360 Degree Continuous Rotation Servo Motor
C**B
Good enough.
Did not receive quite what was pictured, but an equivalent - not a big deal just made it tricky to identify among other items received. Packaging is not labeled with the servo specs so if you put one in a drawer you might want to label it.Both work out of the box. A little noisy but functional.
T**T
So far only one is working without an issue (3 days pass)
Update..I replaced three times and all were not working as it should work except two servo.Some reviewer said to use different command to correct the issue but it did not work for me.I returned all and kept only two servo. Good thing is Amazon return process was great.Ordered 4.One was DoAOne kept rotating (could not command stop)One was working fine for a few minutes and kept rotating (random rotation)Only one is working fine so far.Will update if the 4th one stops.
T**S
works quite well
I bought these servos for a (small)robot I was building and used them to drive the tracks, they work well from my experience with them and my only complaint is that to stop the servos (at least i had to) set them to 94( "servo1.write(94);" for arduino).
M**N
servos do not work properly
Servos didn't work properly they keep turning in the same direction they do not stop with the position of the control transmitter servo keep turning in the same direction
A**R
Ready and Robust
The media could not be loaded. The kookye servo motors have served me well!Right out of their packages, they were tested to verify they work then put into operation in my project. They function as promised. I am pleased with kookye servos performance.
T**.
I hear it works better with a raspberry pi
It works, but it’s a little wired using it on arduino.
J**R
Ok
Good product
E**O
Five Stars
very good
P**O
Not Micro and more like motors
Good servo. However like another reviewer has stated definitely not micro. These are big servos if you are trying to save weight. Be aware these are also continuous motors: They work power on power off, they do not move to an angle as with other servos so will not good for gimbals or arduino projects witch rely on servos moving a specified amount. These work more like motors than servos. This is probably obvious to some but I did not notice and weren't what I was looking for. But the work well and seem pretty robust.
M**N
Four Stars
Works as expected
G**M
Excellent
As advertised, good price and delivery.
J**I
Five Stars
Great
L**E
... fan you going to need some of these - good value for
if your a robotics fan you going to need some of these - good value for money
Trustpilot
Hace 1 día
Hace 1 semana