LIDYUK End Table with Charging Station, Flip Top Side Table with USB Ports and Outlets, Nightstand for Small Spaces, Bedside Tables with Storage Shelf for Living Room, Bedroom, Brown

Con:particle boardthin gauge metalslightly smallslight awkward assembly at the endPros:fairly sturdyeasy to assemble apart from the above-mentioned Consimple instructionsunit complete as advertisedall tool includedStarting with the Cons. This is Chinese particle board. It's not real wood. The leg material is metal but thin. My guess is thin gauge steel of some sort. It is coated with black paint. This unit was smaller than I had expected which could be a Pro depending on what you are looking for. If you want an end table for a low chair or couch it will be sufficient. It would fit very well in a small apartment to add outlets, USB, and efficient storage space. Finally, the assembly was straightforward part from the final two shelves. I'd recommend having a small box or an assistant to hold the shelves as they are screwed in place. For one person this part can be awkward and fatiguing if you have poor upper body strength.Now on to the good. For such a small end table it is surprisingly sturdy. Included are some screw-in adjustable end caps for the legs which make this much nicer for wood, or tile floors.The instructions are in total about 10 steps. I mentioned in the cons it is made of Chinese particle board which is true however I was also surprised by the finish on the parts. usually, there are blown-out cornersor rough router marks but this was finished fairly well. I hate that my expectations are so low that I was surprised by that but the finish on this particular piece was quite nice.They even added a miter cut for the drawer bottom so the electronics cable could be routed without additional fitting. The until came with all the necessary parts but more importantly, it also was exactly like the picture.Again, I hate that in today's world I have to write that but it is true. The outlets sit where they are shown in the picture, the size is estimated as close as possible, and overall if your expectations are correct for an$80 end table then you will not be disappointed. The last thing that I'll mention about the pros is that all tools are included. The only two tools I needed were a knife for opening packagingand at the end one of the foot didn't want to screw in so I had to use a pair of pliers to get it past a manufacturing defect in the tapping. Beyond that, you only need the included Allen wrench and a Phillipsscrewdriver. The one included is a nice size too. IT was study and fit the small screws exactly. There were only 8 screws so this was a bonus for anyone not in possession of a Phillips screwdriver. You might keep it for a while to use around the house.Overall I gave this 5 stars. I only took one star away from sturdiness as I have no idea how sturdy it will stay in the future. The long Allen head screws seem to be well placed in the particle wood. The question will be the wood as the screws seem well suited for the job.If the wood holds up then this would be 5 out of 5 for sturdy again with the understanding this is a light-duty end table made of particle board. It's a step up from Ikea but not by much. I wouldn't sit on it but you'll be ok to put a lamp, computer, coffee, and a small house plant. If the cat jumps upwith all that it may become sketchy. At this time I'd recommend the product. It is doing the job I bought it for and I'm overall happy with the fit and construction for the price. If the quality were to be less then I'd price this much lower. Since there was some attention to detail I'd say it's priced about right. Anywhere between $50-80 would be correct and a good buy.

Came in a slightly damaged box, but the packing was great and the table was just fine. Absolutely EASY assembly. Took about 20 minutes to fully assembled and tweak. The tools to assemble it come with the package, a nice Phillips screwdriver and a hex-wrench. I am using this unit in my recording studio to hold accessories for my recording setup and as a table for my mixer as well as an X-Box and power control strip for the recording gear. Five stars - Great product! I'd buy again.

The first think I noticed when I received these at my door was how small the box was. It was fairly heavy but small. I opened it to find a neatly packaged product with foam protection. The instructions are well written and no tools are needed as they are supplied. If you have ever assembled anything from the big box "I" store you are familiar with the process. There are only two sizes of screws provided in these kits so it is easy to find the parts needed. All parts are well labeled and match the instructions. Follow them and you will have no problem. The outlet panel on the back has two 120 AC outlets and two USB charge ports. This is a nice touch. I do wish the power cord was a couple of feet longer. If you don't place these tables within about 30 inches of a power outlet, you will need an extension cord. My only other concern is that these tables are very narrow. I would prefer a couple of more inches to provide more table top space. These are particle board tables so beware! Do not leave your favorite beverage sitting atop these tables as the condensation will soon leave you cursing! Use coasters religiously with these tables. I do like the hide away space. The lid tilts up to access the hidey-hole which may be a concern if you have a lot of items sitting on top of it. I would have liked to see some rubber bumpers under the lid so when you close it down you don't get that wood to wood clunk. Overall I'm impressed with the design, fit, and finish of these tables. I think they would work well as a bedside table. They are not "fine furniture" but then again, they don't have a "fine furniture" price on them. They are a table. great for small items or maybe to sit in a corner with some plants on it. Check the measurements closely before ordering and understand what you are buying.Pros: well made, easy to assemble, outlets on the back, comes with tools, comes with one each extra screws.Cons: narrower than I would prefer, longer cord needed, rubber bumpers under lid would be nice.

This table is awesome, great value, and fits perfectly next to a loveseat in my living room for phone recharging, and even eating while watching TV, my favorite past-time, haha. This is sturdy, with lots of storage space. USB port seems to work well for my phone.

Easy to put together. I think they are the perfect size for sitting next to a couch. I enjoy the power system and the small storage when you lift the lid. Perfect for my situation.

These tables are very nice and functional! Super easy to put together and look great as sofa end tables. All the usb ports and plugs work great and the lift up storage is a very nice addition.

I bought this for my husband’s side of the bed since we didn’t have two nightstands. I thought this would allow him to use it for his phone charge at night, a lamp and books to read. He was weird about it and I almost sent it back but decided to heck with him. I’m putting it on that side of the bed with a lamp. If he uses it, fine. If he doesn’t, oh well. Fast forward. It has come in handy now that he needs to use it for his C-Pap machine. The bottom shelf fits the machine’s case. I would not have had these options with a normal nightstand so it’s a win. Not only does it fit his stuff and has an accessible plus, but he’s happy now, too.

Very poor quality. Looks much different than it does in the photo. Won't buy a second one.