Polymaker PolyTerra PLA Bioplastic 3D Printing Filament, Matte 1.75mm Forest Green 1000g (2.2lb), Fit Most FDM Printers

One of the best filament

brittle

Worst, breaking into pieces just after opening the pack Even breaks in the ptfe tube

Frode is product

I bought this filament over some of the other options that were about $5 cheaper. It was absolutely worth it. The filament looks amazing and is very easy to print. There was very little stringing and the details look awesome. I tried printing with 0.2 mm, 0.4 mm, and 0.6 mm nozzles and all of my prints turned out near perfect (imperfections were due to poor slicer or printer settings). I strongly recommend this filament to other hobbyists.

Silk PLA can be a hit or miss situation, and this one is ideal. Great colours, prints easily, and very shiny. Would buy again.

I've been printing with this filament for about 4 days, only stopping to remove the prints and reglue the beds on my printers. I've gone through about 3Kg on a stock ender 3 pro and an upgraded ender 3 pro with a glass bed and roller spool holder. Here are some of my opinions and observations on this filament. 1. Accuracy with material. First off the accuracy is amazing. I was able to print 1mm poles for a very detailed model. Not only did they print on an angle but they came out clean with very little underside droop if any. 2. Temperature for printing. I dont have the best insulated house and Temperatures have fluctuated pretty severely during long prints, yet the prints come out perfectly. I dont recommend it but if your house gets very cold when you don't have the heat on. your print will likely come out fine. 3. Print lines and over all surface finish Compared to other popular brands like everyone or other cheap Amazon recommended filaments, this stuff comes out with 0 bubbling or post extrusion expanding (like when the top of your print comes out looking like a hand file) the top and bottom surfaces are prettymuch perfect. As for the print lines, man damn they are nice. At .2 layer height and 50mm speed on my ender 3 pro it looks good enough that I don't bother sanding anything. There aren't and random blobs coming out the side and very little strings if any. 4. Print settings. You can download the newest version of cura, throw a model on and send it to the printer, or you can make custom print settings that took you weeks to make perfect. Either way, you're going to get great prints. 5. Cons The cardboard spool can get caught on the spool holder a little bit on a stock ender 3 pro, but on my other machine that has a roller, its a non issue. Over all this filament is going to be my go to, And by far outperformed every filament I've ever used by a large margin. 10/5 would recommend. I wish I could give it more stars.

Met the needs I had, and not a bad price to boot.

This filament printed very well at times, but at other times I had lots of under-extrusion issues that I eventually determined to be due to the friction of the filament going through the PTFE tube. The filament is not smooth and is very difficult at times to pull through the PTFE tube on my direct drive Voron printer which caused the extruder to slip. When I bypassed the PTFE tube, the print was perfect. I won't be ordering this filament again.