RedrexDual Gear Ender 3 Extruder Metal Drive Feeder Upgrade for Ender 3 V2,Ender 3 Pro,Ender 3 Neo Series,Ender 5 Pro,Ender 5 Plus,CR10,Vyper 3D Printer TPU Filament Support(Motor Shaft>21.5mm)

RedrexDual Gear Ender 3 Extruder Metal Drive Feeder Upgrade for Ender 3 V2,Ender 3 Pro,Ender 3 Neo Series,Ender 5 Pro,Ender 5 Plus,CR10,Vyper 3D Printer TPU Filament Support(Motor Shaft>21.5mm)

Q: I have a cr10s, do i need right hand or left hand??

All the ender 3 and cr10 series need the right version!!

Q: Will this work with anet a8 plus? and what version would i need to buy?

You're having trouble with YOUR extruder, too, aren't you? We all are. They're terrible. This will work with your printer if you're fed up with their direct drive and you're converting it to use a Bowden tube. Be aware that Bowden tube extruders come with their own unique struggles, but they're not as nasty as the A8 Plus's direct drive extruders. Since you're doing this conversion, you'll also need some sort of 24V Bowden-style hotend. It mattereth not a whit whether you go with the left-hand or right-hand version for your printer; you'll mount it wherever you figure it'll be convenient. If I were you, I'd mount it somewhere left of center, but your circumstances may be different from mine. While you're at it, you might as well upgrade your linear bearings to polymer, too, and your control board to one of the many alternatives. Whatever you do, don't screw around; replace that power cable NOW before you burn your printer to a crisp! The one that runs from the power supply to the control board. It isn't big enough for that load, and the crimped terminals sometimes catch fire. Replace it with no less than #16 AWG wire.

Q: Will this fit a Monoprice Mini v2?

It's designed for the Creality CR-10, but it's a fairly safe bet that it would fit any bowden printer that uses the same size motor for the extruder, and the same size filament (The creality uses a 42-40 stepper motor, but many other stepper motors have the same spacing between screw holes). Depending on the bracket the motor is attached to, it's possible the screws that come with this part might not be long enough, but replacement screws shouldn't be hard to find.

Q: Is this all i need to upgrade an ender 3 to have a metal hotend for printing petg?

You don't need an all-metal hotend for petg usually. The one on the ender-3 will work just fine. The limit of a ptfe tube is around 240-250. Petg prints with a hotend at 230-250 usually, just make sure the filament you buy isn't one of the odd ones that might need higher temps. If you're worried replace the ptfe on your ender-3 with high grade stuff like capricorn and look for lower temp petg filaments.

4.4/5

ID del producto: 372698345

Transacción segura

🔧Adjustable Tension

⚙️Dual Gear Mechanism

🛠️All-Metal Design

Comprados juntos con frecuencia

Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>20mm)

UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket for Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer for B-MG&Dual Gear&Bowden Extruder(NOT for Neo Series,Extruder&Hotend NOT Include)

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

Descripción

🚀 Elevate Your 3D Printing Game!

OPTIMIZED FEEDING - Say goodbye to feeding issues with adjustable spring tension.
ENHANCED DURABILITY - Crafted from premium materials for long-lasting performance.
UNMATCHED PRECISION - Experience flawless 3D printing with reduced jamming.
USER FRIENDLY SETUP - Quick installation with clear calibration instructions.
SEAMLESS COMPATIBILITY - Fits a wide range of popular 3D printers effortlessly.

The Redrex Dual Gear Ender 3 Extruder Metal Drive Feeder Upgrade is designed for enhanced performance in 3D printing. With its dual gear extrusion mechanism, adjustable spring tension, and all-metal construction, it ensures reliable filament feeding and compatibility with various Ender and CR10 models. Weighing only 59g and compact in size, this upgrade is a must-have for serious 3D printing enthusiasts.

Presupuesto

Manufacturer	Redrex
Part number	RDX3D032
Item Weight	59 g
Product Dimensions	2.5 x 5.6 x 5 cm; 59 g
Item model number	RDX3D032
Size	Dual Gear Extruder
Style	Dual Gear Extruder
Material	Wood, Aluminium, Metal
Item Package Quantity	1
Batteries included?	No
Batteries Required?	No

¿Tienes una pregunta? Mira lo que otros preguntaron

I have a cr10s, do i need right hand or left hand??

Will this work with anet a8 plus? and what version would i need to buy?

Will this fit a Monoprice Mini v2?

Is this all i need to upgrade an ender 3 to have a metal hotend for printing petg?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Por Vikram D.

La funda MOLLE es de una calidad excepcional. Estoy muy satisfecho con mi compra.

Hace 2 semanas

Sneha T.

Recibí mi producto en perfectas condiciones. Excelente servicio en general.

Hace 1 mes

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

AR$60577

Derechos e impuestos incl.

Argentinaalmacenar

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía

Transacción segura

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Anita G.

Buena experiencia, pero las actualizaciones de seguimiento podrían ser mejores.

Hace 2 meses

Anjali K.

La calidad del producto es excelente. Exactamente lo que necesitaba para mi trabajo.

Hace 1 mes

Ver todas las reseñas de confianza

Sobre nosotros

Servicios al cliente

Atención al cliente

Acceso Regional

Legales y políticas

Social

Obtén la aplicación

RedrexDual Gear Ender 3 Extruder Metal Drive Feeder Upgrade for Ender 3 V2,Ender 3 Pro,Ender 3 Neo Series,Ender 5 Pro,Ender 5 Plus,CR10,Vyper 3D Printer TPU Filament Support(Motor Shaft>21.5mm)

Descripción

Presupuesto

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes