[5 Pack] LOCA UV Adhesive Low Ordor and [1 Pack] UV Light 5W, Used for Liquid Glass Screen Protector of Any Phone Brand

Used this glue to repair a Google Pixel 6 Pro that got a corner hit to the front glass. BB sized area crushed out, and cracks to the opposite side, including across the fingerprint reader. Cracks are invisible during use and when viewed straight on. Only exception is for the rounded edges, but that's because they are like being angled all the time. The hit point is largely hidden when filled with this resin. No more white powdered look, glassy clear like magic. Very happy with the outcome and so easy to use! No change in the fingerprint reader from my single crack.

I had an exceptionally challenging situation. Dropped my phone from the attic and shattered the screen but the digitizer still worked. Couldn't remove all of the glass so I took a risk out of necessity and carefully placed a self gluing tempered cover glass over the existing screen. The phone was missing glass and three of four corners One of them was approximately a square inch another one about a half a square inch and the other about a quarter of a square inch. So all four edges had gaps between the tempered glass and the original glass. Immediately after putting the screen on and noticing the gaps I knew that I had to get something to fill those in or the glass would begin to get increasing amounts of dust and debris between the repair side and the original. Those areas would become unsightly and possibly unresponsive to touch so I knew that I had to fill them in and Loca was my only choice if I was going to have good visibility in the result. Because it arrived quickly, I didn't have much clean up prep before placing the glue. It seemed a bit too viscous at room temperature 68° f and so I just heated it up a little bit in my hand and it became much easier to flow and the capillary action was fantastic . Less is more. I didn't want to get it all over my phone I just wanted to fill in the gaps so after warming it I would trace along the contoured edge of the new glass between it and the phone frame. The warmer the glue the more easily it sucked up under the glass and made a 99% complete occupation of the area beneath the repair glass and the phone. After filling in the first and largest of the gaps I thought it was best to harden it immediately. I was a bit skeptical about the lamp cuz it is so lightweight kind of flimsy looking but it made quick work of all three of the repairs. To be specific it took about 3 minutes to harden up and I went ahead and left it on 5 minutes on each of the repairs and although the center of my phone is still shattered The shards don't get caught in my fingers and I can see through it fine And I was so surprised that the look of the phone overall while not perfect it's a heck of a lot better than it was prior to my shattering it. The surfaces contiguous and smooth and instead of having dirty corners with no glass that were kind of dingy and unclear image now it's all clear. This LOCA glue worked fantastically. I'm really happy that I purchased this kit which included the little LED UV curing wand. It was so convenient not to have to shop for the UV portion and just have it included and worked so well. If you're considering using loca for an upcoming repair, I wouldn't even look at any other products with this one I'm not saying that other products are not good I'm just saying that I know for a fact that this is a perfect assembly of all of the necessary equipment and supplies to get the job done. Why complicate things? Good luck!

I think the amount of time spend doing is too long bonding to the UV. I watched a lot of DIY videos online to get familiar with the procedure. It is rewarding in the results. I'm getting a bigger UV lamp this weekend, I am hoping it to have even adhesion results. * Tablet was a challenge with flatening (2 attempts) * Smartphone I notice it has a UV Lamp imprint from long exposure in one spot (on one of the two phones)? Hopefully this will last.

I bought this glue to attach a screen protector to my phone with mildly curved edges, where the screen protector did not glue to the curved edge. and left an unsightly line around the edge of the screen. I applied the glue and cured it using the included UV lamp. Maybe I used too much or too little, soon big voids developed. At least the protector and glue came off easily. Now I'm using no protector, living on the perilous side of life. Oh, these first-world problems, how can we survive? 🙃

When I say fix I mean those protectors that never seem to adhere completely around the edges and leave an annoying lifted edge appearance. This product will fix that. I will not delve into whether this will make physical scratches on the manufacturers glass appear to disappear as I have not used it for that. But in making a glass protective cover appear to be seamlessly attached it's fantastic. Low viscosity allows it to flow under the protector if already attached and enough time to work the liquid into the gap and then apply the UV light to cure the resin. Looks perfectly attached when done. Do NOT use this anywhere near a physical button as one reviewer did...it'll lock up the button and that will be end of that. Only use on touch areas that are displayed as "button" symbols on the screen.

Terrible. Never cures. Tried multiple times at 5 and 8 minutes. No instructions. Don’t buy.

Put this under a screen protector for my phone, and it covered up all of the scratches nicely! The only one left is a slightly major crack, that it did fill in a little bit it's still noticeable. I reccomend using with a screen protector and not on its own.

I have was going through screen protectors for my redmin note 14 pro 5G like crazy due to the screens were not sticky only on the edges. As shown on the pic ..I bought different brand all the same ..when I came across this product! OMG money saver and great use. Tip use all the glue for one application. Make sure you center the glue it in the middle of the phone then place the screen protector remove all bubbles then use the uv light.

I bought this for my screen protector, I have a curved screen which makes it difficult to find protectors that stay on my phone cuz all screen protectors for curved screens tend to only put glue on the perimeter of the tempered glass, and usually unglues quite quickly especially in a case. This works fabulously however I wasn't patient and I don't think I used enough glue so there is a couple bubbles but that's on my fault. This product allowed me to have a screen protector that doesn't come off. If you have a curved screen you know what I'm talking about. I definitely would recommend it but take your time

曲面ガラスのスマホにお勧めします。

Does the job

Good

basically filled the cracks on my ipad