Rutland Castable Refractory Cement 12.5 Pound - High Temperature Fireplace & Woodstove Fire Cement - Cast Custom Fire Brick, Refractory Panels & Fire Pits, Pizza Ovens

Very easy to use,set up nicely in 24 hours. The pail was enough to make 1 single block that was 3 and a half inches wide and nearly that thick and 21 inches long. I made a form to make 1 solid brick to place across the front edge of my Opel2 fireplace insert to prevent debris from falling out onto the hearth. So far no cracking and is working as intended.

Well to start off with We, my Girlfriend and I have a PreWay fireplace which as we discovered went out of business years ago. It was time to replace the refractors and could not find them anywhere, everyone wanted to charge an arm and a leg to cut or modifie there refractors to fit. Rutland was the answer.... First I made molds to the exact measurements of the old refractors, for the Rutland Cement, I covered the mold with plastic to prevent it from sticking. Also placed in the molds was a garbage bag, this gave the Rutland Cement a unique texture that really gave the refactors caracter when dry. I did mix the Cement a little wetter than the instructions called for to be able to vibrate the mixture to relase all bubbles once in the molds. The refractors fit perfect at a fraction of the cost. I highley recomend this product to anyone who wants a unique, fuctional fireplace. Other than mixing a little wetter than the instructions called for, just takes a little long to dry. Hope this helps someone out there.... I have photographs of the finished product, if anyone is interested. Just no where to put them on this page. Good luck and stay warm....

Worked very well for making a new solid "floor" in a baking oven. However has a sandy consistency, rather than the smooth putty-like consistency of the pre-mixed variety of the same brand.

I got this concrete fire proof, if you follow the instructions to set up is gonna make your fireplace more reliable, I cure the concrete with small fire 1st time, next day I built a 2nd fire medium size and the 3rd day I build a normal size, this prevent the concrete to crack.. the recommend portion is two buckets to make a 1 inch thick on an area of 2 square ft.

The firebox rearwall had significant crumbling; some large areas had eroded 1/2" deep. Side walls also had some cracks and erosion. The worst areas were in the rear corners. This stuff takes a good bit of effort to get product to adhere to the surface. The proper mixture is key when making these surface repairs. Too wet, it'll run down the wall; too dry and it won't stick. I've had several searing hot fires and condition is the same as day one. Good stuff!

If your going to try to patch a vertical surface this will be very hard to use if you use the recommended water mix.It will just run down the surface. I accomplished what I wanted but if I used it again I would make a very stiff but not dry mix and once it set up good just keep it really wet for a few hours to give it enough water for strength. I was very carefull mixing but it had way too much slump for what I wanted to do with it.I would ignore the formula they give you and go by feel. To be fair like with all mortar a little water will make a huge difference but I think for parging a vertical surface their water ratio is way off. Once it sets up it is super hard though and I was satisfied with the finished product.

It turned out that I needed a little more than was in this container, so I went to a local brickyard and bought a 50 lb bag at not much more than this price, so it is a bit pricey, but I'll tell you, the plasticity of this product beats the heck out of the bag brand. That means that if you have a crack in your firebox, this product does an excellent job of filling it. It also dries faster and harder than the bag brand, so for your needs you might want to go with this product instead of something cheaper.

Dries and cures hard. Very grainy, a bit difficult to apply vertically. Gave a good solid pour for a fire pit bottom over concrete slab.

Lo usé para un asador y funcionó a la perfección

Good

Excelente producto, repara grietas o ropturas sin problema, seca muy rápido 24 hrs

Buen producto

Es un gran producto y a un excelente precio