HellCracks ATX computer office and gaming case without PSU (CB301D)

Bought just to replace another case. Lovely case, roomy for small builds. Might be a tight squeeze for 3000 series up gpus. Not many HDD slots. Ssds fit well. Fans work a treat, & are far quieter, I mean vastly quieter than those stock fans that I have in my cis case. Keeps everything cool & ventilated with a glass door panel too. Cheap but well worth it. Will buy again.Only gripe the fans, limited choice function for lights. Plus my Asus aura doesn't recognize or control these case fans.Highly recommend.

No complaints about this case, it punches well above its price point. Comes with two front fans and was easy to install another couple on the rear and top from the same manufacturer. Easy build, no sharp edges, all the required screws and cables included. If you want a solid case for a low or mid range pc build this is great option

The media could not be loaded. This case looks very nice with the ARGB fans which you can control the colour of from a button on the front io. BTW, these fans connect through SATA power, and are all chained together, so you cannot control the speed of the fans. I’ve found this to not be a problem, as it keeps the system cool, and are not loud. The case was good to build in, no major issues, but I have a few cons of the case. The case came with micro atx standoffs already installed, and I used an atx motherboard, so had to install 3 extra standoffs. This was hard, as a ‘screwdriver’ type tool for putting the standoffs in was not included, so I had to use pliers, which scratched the standoffs a bit. Another problem with the case is that there is barely any space at the back. I also used a modular psu, and had to shove the cables next to the PSU. Luckily, you cannot see the back panel from the glass side of the case. I also had to quite forcefully put the back panel on, due to the lack of space. Overall this case is good for the price, however could do with changes such as extra space at the back for cables.

The media could not be loaded. First of all let me clarify the Case comes with 3 ARGB fans pre assembled in the front of the case.The rear exhaust fan (£4 slave fan) was purchased separately and daisy chains to the front fans which are all controlled via a separate LED button on top of the case.I’ve recently built 2 different spec PC’s in this case and the finished product looks much more expensive than the £rrp.The case comes well packaged and has usb 3 motherboard connectivity/ usb and audio connections.Packaged separately inside is a screw package with motherboard/psu/gpu/SSD and extra standoffs.Cable routing is easy with plenty of room to cable tie all cables to keep them tidy.This case accepts ATX/micro ATX boards with ease and comes with top and bottom dust filters.The tempered glass has a peel off clear coat on both sides and has a solid feel about it.This is a budget case but with a premium look at a great price.For a limited time you can claim a free additional fan pack or 3.5 IPs programmable screen see HCS website for terms and conditions.

Case is much less appealing in person, in the pictures it looks light grey and has no logos, in person there’s text at the front bottom and the colours aren’t matching from the front material to the side, though for the value it was surprisingly higher quality than expected, the provided can at least isn’t making any noise and there’s actually a bit of space at the back for some cabling. 6/10

I am impressed by this case. My last build was in a cooler master case and whilst that was great, this was not far off the quality.The fractal case which it is inspired by is a lot of money! This has great looks and a very similar vibe. Looks great in my office.Nothing major to call out about the case, cable management was a little tight on the back but went in with a little perseverance.Overall very pleased. Airflow is good with 3 intake fans and 1 exhaust. Plenty of room for AIO if you want too.I did replace the fans which came in the case with some ARGB variants as the stock ones have a proprietary connector. This was for the RGB and the fans which are powered by a SATA connector.Not a massive issue and something I accepted. I have kept the 3 fans as spares but likely won’t use them except for a temporary fix.The case comes in black and white. I am glad I chose that option!

Perfect fit for an MSI MAG X570 Tomahawk motherboard.One gripe: comes with 6 mobo standoffs fitted and two more in a baggie. But my mobo had 9 mount points; either one standoff was missing or they don't supply enough - I had to buy a pack.However, everything else is fine, it's wide enough to squeeze in the massive Thermalright Peerless Assassin 120 SE cooler and the one case fan supplied keeps it plenty cool enough.The case itself is quite light, but regardless reasonably sturdy.There is plenty of space and access for cable management at the back. Some of the gaps are quite well hidden, I saw a review complaining about lack of port for the 24-pin power connector - I had no such problem.Comes with a dust filter at the bottom for the PSU, but really could do with one at the front too. I might make one with mesh and magnetic strips, to sit behind the front plastics.Sound deadening works, it's nice and quiet.I don't like flashy RGB fans and cases, a "sleeper" case is much preferred, and this fits the bill. It can sit in a corner of the living room and not make a feature of itself.

For 30quid delivered I'm very happy with it so far. Nice and slim so squeeze and tie up those loose cables. I wanted DVD drive so options are few. PSU on top helps with ventilation. Yes you get a thick glass on one side which doesn't sit too flush. Fits all the Thermalright tower cooler. I build another PC using Horizon Exo which is roomier and better hinged glass side but fatter and no DVD drive option. Given the price drop of Exo it's probably even better value if you don't need DVD drive. Both sets of 3 case fans are ok and nice RGB but noisy without speed control. I replace with 3/4pin fan plugged directly onto the motherboard instead.

Hatte es als schnelle Übergangslösung bestellt und für den Preis nicht viel erwartet. Also Qualität ist deutlich besser als erwartet! Jedoch ist es auch schmaler als gedacht… meine 6700xt Rog Strix hat leider nicht reingepasst aber eine 3060/3070 passt problemlos

Le boitier est très cheap, il y a peu d'espace pour cacher les cables derrière.Les Leds ont fonctionnées 10 minutes puis c'est fini, impossible de les faire marcher

Simple and sleek looking. Very nice. I wanted a new case that was not "in your face" or over the top like many cases are now. This is clean and nice. It's a bit on the small side but I like that. If you have multiple fans, they may not fit.

Recht schickes Gehäuse, sogar schallgedämmt.Einbauplatz für ATX Netzteil unten, Kabelführung der verschiedenen Stromanschlüsse daher sauber verdecktKritikpunkte:Das Blech ist ziemlich dünn, aber das ist heutzutage so. Stahl ist teuer und Containerfracht auch.Der 12cm Lüfter ist zwar leise, aber wirkt etwas billig und ist nicht PWM. sonder stromgeregelt. Aber den kann man ja wenn nötig auch leicht tauschen.Der letzte USB-Anschluß ganz rechts im Top-Panel wäre statt Blindstopfen als zweiter USB 3.0 geistreicher gewesen, aber alle Anschlüsse sind ansonsten wie beschrieben.Für einen Sternabzug reichen die Negativpunkte aber nicht.

Edit: on the picture it doesn’t show a logo, which it does have on the front of the case, making it less clean. Perfect case with room for cable management, not a case for high end systems as the front doesn’t allow a lot of air to pass through. But for the price it’s very good