eXtremeRate Clicky Hair Trigger Kit for PS4 CUH ZCT2 Controller Shoulder Buttons, Custom Flashshot Trigger Stop Flex Cable for PS4 Slim Pro Controller JDM-040/050/055

these digital triggers work great, its made it hard to use stock triggers so im going to install these on all of my controllers

Very satisfied with this. Ive been using it for about a week and i have no issue for the most part. All buttons work, install is simple; but you mist be careful when putting the trigger buttons in place. They insert at an sideways angle.After installation you may have trouble with the bumper buttons sticking.You can easily fix that by shaving down these small tabs on the triggers that get in the way of the bumper buttons. Its 2 small tabs on the top side of the triggers. Once theyre shaved flat there shouldnt be any problem.

INSTALLATIONIt's not for the faint of heart. You will have to open up and disassemble the controller almost as much as it can be disassembled without removing soldered parts. The company does have a YouTube video that is more helpful than a simple manual for most intents and purposes, and the video is pretty clear, though it might require some pausing and careful scanning to be sure you are putting certain parts in there correctly.Overall, the scariest part is the first step of opening the controller, during which it really feels like you are going to break something. I've opened five different DS4s over the past couple of weeks, and it seems to be the case that you necessarily WILL snap a tiny bracket on the left-inside when you open it. After inspecting the bracket, I'm fairly certain that it is designed purposefully to break when open - maybe for warranty purposes on Sony's part, like to determine whether a controller has been tampered with when they receive a DS4 under warranty for repair. Perhaps they have some special tool that they use to open it without snapping this bracket. Either way, after using the prying tool for the first couple of controllers, I've found with the others (and in subsequent cases where I've reopened controllers I've already opened once) that it's much easier to just forcefully pull one end apart, and then the other. Especially since the prying tool itself takes a great deal of damage after being used once or twice.I tried to photograph the aforementioned bracket that breaks, but it's really tiny and difficult to capture clearly. You'll notice it if you look closely enough, but it won't make any difference in regards to anything. Just be sure to shake out any tiny bit of plastic that might be rolling around the inside of the controller before you reassemble it.THE MODMy biggest complaint about its design is that it's designed for all four shoulder/trigger buttons. If you're like me, you just want to address the pull range of the triggers (R2/L2) so as to make them shallow, and don't have any issues with the shoulder (R1/L1) buttons as they are, either in terms of depth or clickiness. This mod doesn't care. It's for all four buttons, and your shoulder buttons (R1/L1) will ALSO be shallower and more clicky after you fully install this mod.Additionally, if you've read other reviews and questions about this product, you might be aware of the concern of not being able to use both buttons on one side (R1/R2 or L1/L2) at the same time. I can verify that it is a bit of a concern. On both controllers I modded with this product, the L1 (or R1) button will not reliably depress when the L2 (or R2) is also being held down. Sometimes it will a little bit, and it's a little more reliable in that regard if you're pressing straight down on the L1/R1 button from the center/top while holding the corresponding shoulder button, as opposed to pressing the button on its side. It also, for some reason, seems to be more of an issue on the right side than the left. That being said, while there are issues with the shoulder buttons depressing while the corresponding trigger is being held down, the detection mostly seems to work. In other words, the button press is still being detected even if the shoulder button is not depressing.THE GOOD NEWS IN RESPONSE TO BOTH OF THOSE ISSUESI've found is that the simultaneous-press issue can be addressed, and doing so also addresses the first issue I mentioned of not wanting to mod the L1/R1 buttons. The solution is really simple, too: just don't attach the included clear pegs to the L1/R1 buttons. I was told in the questions section here on Amazon that it wouldn't work if it the mod is not fully applied, but it simply isn't true. After being annoyed with the issue of both buttons on one side not being able to depress simultaneously, I decided to pop one of my modded controllers open again and remove the pegs from L1 and R1. After that. I discovered that there was no loss of functionality whatsoever, and that the L1/R1 buttons were no longer as shallow as the mod had made them. And it also thoroughly addressed the issue of not being able to press the shoulder/trigger on one side simultaneously - all four can now be depressed simultaneously without any issues. After that discovery, I immediately removed the pegs from my other modded controller as well.CONCLUSIONI liked it before I discovered that it can be installed without the shoulder (L1/R1) pegs inserted, and I love it now that I have made that discovery. I've used it with several games, and it's just fantastic with all of them. It's going to cripple you with games that require trigger sensitivity (mainly games that involve driving), but if you're looking at this product at all, you probably already knew that. If you want to play a racing game or GTA, you'll still want an unmodded controller for use with those. For everything else, if you're not attached to the feel of deep triggers or straight up dislike it, this is definitely a great solution. I'm taking one star off for the aforementioned defect and design choice, as well as for the unclear answers as far as addressing them, but really, if you just leave the R1/L2 pegs out of the mix, this mod should do exactly what you want it to do.

At first, the triggers weren’t giving any free play and were rock solid (no button clicks). When I installed them, I made sure the trigger buttons were flat and the trigger add-ins were also fully installed before closing up.On windows, it initially said that left trigger was constantly enabled too.To fix this, I pressed both triggers as far as possible. Now triggers register perfectly and even has the button click I was looking for!!I suppose when I installed the trigger add-on it wasn’t fully placed in. So if you were having this issue, make sure to push the triggers until you start hearing button clicks from your triggers.Next version of this I hope to see a similar implementation but for the face buttons too! I’ll definitely upgrade to that version next!

The triggers are nice as long as they work. My R1 doesn't click anymore. Its squishy and has no definitive on/off. I expected for them to last longer... The installation was simple other than having to glue the plastic adapters into the trigger housing. Small modifications were made for the product to function properly.

Okay so I just bought a ps4 recently. I haven’t played cod since black ops 2 came out and I started when the first call of duty was released. Anyway I’m efforts to make me feel younger I got it. Now I have never had hair triggers on a controller and I wanted to try. The L1 and L2 work perfect! R1 is good. R2 doesn’t work no matter what I try. I tried the other fittings. That doesn’t work. It still weirdly goes down pretty far and then pops. Like not clicks but the whole button is affected. It sometimes while I’m playing will stop firing and I thought maybe it’s just me at first and then I tested it in a private match with no opponents. And it still happened. I love the idea of this. I mean it’s not much different if you aren’t an avid gamer but to the people that play all the time it really can be the game changer. Anyway it sucks that the R2 doesn’t work right because otherwise I would buy this for my second controller. Maybe the company sees this and helps me fix this or maybe they don’t but either way I would recommend this to people if they play a lot. But to try it on an extra controller first.

The install on this was very easy. You really have take your time. So far they work amazing and this is certainly something I would recommend to anyone willing to do surgery on their controller. If that is you then this is a vastly superior to trigger stops and significantly less hassle.One thing that concerned me was I am not hearing the same mouse click sound on the triggers that I hear on R1 and L1 and I’m not sure if that is supposed to be the case. There is the full mechanical action from the button though and everything functions great - just no click sound on the triggers after I installed. Given that the product works fine I see no reason to knock off stars for that.