Rust-Oleum NeverWet Multi Purpose Kit, Silver Gray Silver Gray

I am a great lakes Scuba diver. Diving Lake Michigan this early in the season is extremely cold, and I use a dry suit. Unfortunately for me my suit has developed some leaks I have been unable to find and patch, So I used NeverWet to coat the inside and outside of my suit along with my undergarments, which are like a fleece snowsuit. I was pleasantly surprised to find that while the suit still leaked, because the undergarment was coated I didn't get wet and still stayed warm and dry. The two part mix works well! It makes what it is coated just a little bit stiffer, and has a milky haze to it when dried. But if it can keep me dry at the bottom of the lake, it will work great on shoes, boots camper canvas and anything that the milky haze isn't a problem for.

I am pleased with the result of the product on cardboard. I have included a video of a test piece of cardboard to show how effective it is. I also put the product on some packing material that I use for an on-demand camp shower. I wanted to protect the packing material because the camp shower equipment might be wet when stored and I did not want it to create a soggy mess of it.

I’ve tried this on several things now. It definitely does what it claims but, as others have pointed out, it’s not clear and it’s most noticeable on black or very dark items. It leaves a bluish haze. Durability is also pretty weak on anything that ever gets moved or touched. The best use I’ve found is on my kayak paddle. It turns the black paddle blue-grey but that doesn’t bother me. I wish I didn’t have to re-apply it every 6-10 trips, though. No matter how careful I am, the friction with the water alone eventually ruins the effect. Actually, it’s quite sensitive to friction so you can’t even wipe it without dulling it’s water-repellant quality. Actually removing the product from a surface is quite difficult, but destroying the effect is pretty easy. Then you’re faced with putting another coat on, thickening the bluish haze. For something stationary like a satellite dish, mailbox etc, you should expect to get several months.

This stuff is wicked awesome! It really works! However keep in mind that it is not completely clear and will leave a slight frost finish on anything its applied to, this is likely why most all of the video demonstrations for it on YouTube are on white cloth. I used it to spray a pair of Sperry Top Siders and a Small Camera case. The Top Siders came out amazing, Once painted you cannot tell that it was applied until I dump water all over them. They are made out of a tan canvas-like material, I sprayed the canva, rubber, and the laces. After they dried from both applications completely unnoticeable. The Camera case on the other hand was a different story. This was mad out of a neoprene-like material and was black in color. The short version is that it completely ruined the case. It discolored the case gray leaving a purple tinge and messed up the zipper. In retrospect I could have prepped this a bit better by masking off some areas but I thought that might defeat the purpose. To get the case back to black i tried spray painting it but epic fail. Painting over the top coat of Never Wet turned most of the paint into powder. I had to re-apply the base coat then while wet, spray the flat black, let dry then spray the top coat. Some things are not meant to be Never Wetted. See Good Mythical Mornings Never Wet Video on YouTube for what does and doesn't work.

I'm going to assume that if this product was used, it would have been great!? Unfortunately, it was damaged before that could happen. Not, having used the same product before, I know for a fact that it works. But, I cannot attest to the seller or Amazon's part. I do know it came in the exact same packaging and was legit. No problems.

Used this on two pairs of leather work boots, one pair was relatively new, the other pair relatively worn. The newer pair absorbed most of the sealant, but is waterproofed for the most part, maybe a second coat would be better. The older pair of boots were covered with a white chalky finish which the product does say can happen on some surfaces, but I could not get the white stuff to rub off the boots, so it essentially looked as though I made a mess with white spray paint on those boots, the water proofing didn't really work on that set either. I think it's a good product if you use it on a brand new, less absorbent surface.

I am a phd student working in applied physics. I was in need of a superhydrophobic layer in one of my experiments. Through the google search i came across this product. I have applied it on plastic, metal and glass surfaces and it worked more than my expectation. I would like to suggest this product for all the costumers who are in need of a water repellent surface. Regards Amit

Bien Todo muy bien excelente muchas gracias. De antemano Muy buen producto. Llego rapidísimo y en excelente estado. Muchas gracias

Perfecto Parece que sea magia repele agua y la suciedad es cómodo y rápido de aplicar se lo recomiendo a la gente

il prodotto non impermeabilizza come si vede nei video pubblicitari ,avendolo usato su t shirt come dimostrato ,non ha sortito l'effetto desiderato

Ya it is amazing but be careful if you spray it on light plastic it will crack it. We used it on trail cameras but it cracked the motion sensor lens.