UV Resin, 2 PCS Upgrade Ultraviolet Epoxy Resin Crystal Clear Hard Glue Solar Cure Sunlight Activated Resin for Handmade Jewelry, DIY Craft Decoration, Casting and Coating(200g)

Better than Bondic because:Much stronger than bondic.It dries clear. Bondic is like an amber crappy color.This creates a much stronger, harder to break seal.It's cheaperIt comes with WAY MORE resin. Like WAYYYYY moreif you've used bondic you know what a pain their applicators can be. Bondic applicators gets difficult to apply as they start to empty. But the precise tip is needed sometimes)So i even filled up my empty-ish bondic applicators. (I mixed the two because who cares? I sure don't but if there's any issues, I'll come back and update this... actually i probably won't. I have no doubt it'll work fine. They're both uv resin)The tip of this product allows for much more coverage (be cautious of over applying. Apply a little, cure it quickly, then apply another layer, cure it, on so on) Otherwise this stuff will come pouring out.Have your UV light ready (with bondic too! Any uv resin) just have it ready. And make sure you don't accidentally shine your UV light on the applicator as you attempt to cure each layer. (I did this with bondic at least 10 times. I would apply some and aim the uv light, then attempt to apply again before i moved the light, or accidentally just held the light on the exposed tip. It sucks.)I use this for fixing things, not making jewlry.Sometimes if i have to glue something that is difficult to hold until the glue dries (just as an example, an arm on a vinyl figure.) I'll cover the surfaces (that I'm going to bond) with the glue, and then add uv resin around the edges (of course it ends up mixing with the glue but so far that has not caused an issue)This way i can cure the resin and set the item down as the glue cures. (I'm impatient and there's nothing worse than trying to hold two tiny surfaces together that keeps slipping. It's maddening)This method makes works every time so far. It's awesomeThen you can peel or pick at any resin that globbed up from the surfaces if needed without disturbing the glue bond (hopefully. Be careful)I'm very pleasantly surprised with this product. It'sinteresting that bondic used an inferior, weaker bonding resin, with an ugly color, and a crappy applicator... the creator said he had the idea because he's a dentist and uses uv resin for teeth. 🙄 uv resin has been around for years and I'm pretty sure he wasn't the first person to use it to fix somethingTHIS IS NOT A GLUE. YOU CANNOT GLUE WITH THIS.THIS. IS. NOT. A. GLUE... for crying out loud people.And if you need to bridge a gap between the two surfaces, make a quick tiny "string" from one side to the other, cure it fast before the "string" collapses then add another "string". Cure and then you should have a foundation you can use to hold up more resin. Just build up tiny layers. And extend the uv resin further past the two surfaces. The bond works better with more surface to grab.If you use this as a glue, then you deserve what will happen. Simply use this to hold the surfaces that have glue. It's that simpleNo need for pictures. It's a resin.

Works well for what I wanted - a thicker epoxy resin for filling voids in epoxy art pieces that were turned on the lather. It is crystal clear, and appears very hard. Cures quickly with a cheap little UV pen.

Works very well as it should cares very well under a black light but I like to take it out in direct sunlight to give it that extra strength, has a little pungent odor when being poured but it's a chemical what do you expect and not bad for the price for two bottles.

My go-to. Applies smoothly and with ease, perfect finish every time. I generally use to seal round keychains I’ve made and it really makes a huge difference in the product appearance and durability. I’ve had some of the keychains for months to even years and no breakage/chipping. Viscosity is good for not running, is thick and stays in intended area. Definitely will continue using this brand.

Arrived as two (2) bottles with covers and pour spouts. Although the bottles look small, they are able to go a long distance for a good number of small projects. Personally, I used them to cover NFC tags onto promotional goods for work. Resin pours smooth and crystal clear but had lots of fine bubbles. Because I had an NFC tag under the resin, personally chose not to expose to flame to remove and the end product still looked of good quality. My only reason for the 4 stars is that it took exceptionally long to cure. The instructions said it may be sticky and to use ice water; that method did not work for me at all and I ended up with a few finger printed products. The best method was a large lamp that I could leave items under for a longer period of time. That resulted in absolutely no sticky residue. Would recommend for first time resin products, small projects or specific larger projects that have a means of curing.

I have been making badge reels for three years now. I tried a few other UV resins and have been a committed consumer now to JDiction! It is easy to work with and holds up really well. I have no complaints from customers telling me that the resin yellows. I highly recommend this product!!

I find JDiction's products to be hit or miss. They're either really good or really terrible. This is one of the good ones! It's very thick, so unless you hold your lighter/torch over it for too long and really heat it up, it won't flow over your item when you're doming. It cures really hard in not a very long time, which is much better than the cheaper brands (or even some that are more expensive, honestly) which never seem to cure all the way. You can use it to coat other items, or you can use it on its own to create things. Both of the items pictured here are made using only this resin.Because it's so thick, it does retain bubbles more easily. If you're adding color to your resin, it's best to let it sit for a long time after mixing in the pigment so the bubbles can come out. I either let mine sit overnight (in a cold garage) or I put it on my heating pad for a while. Both ways will get the bubbles out.I recommend this!

I got this for a project and it worked perfectly.