24V Dimmable LED Driver, 50W Triac ELV/MLV LED Transformer Electric Power Supply, 0-100% Dimming, Compatible with Lutron, Leviton Dimmers for 24Volt LED Strips Cabinet Lighting.

This dimmer was installed to power up led tape light for toe kick lights in a primary bathroom. No humming or buzzing while dimming and it has smooth (non flickering) transitions while changing brightness.

Have used these dimmers for years with lutron and Leviton dimmers for under counter over counter and all different types of LED light and displays. These are problem free and will work flawlessly providing you do not overload them

Works well. Easy to install. Only complaint is that the product dimensions are not listed. The product image makes it seem a lot shallower that it ended up being. Our install had to change, costing us time and money.

Nothing wrong with it, just make sure the leds you are using are 24v

Worked okay with the 24v setup I bought it for until about 6 months in when it started to flicker. After a lengthy claim, I finally obtained a replacement, only to have it fail again about a month later. The first driver also killed my smart dimmer, so I had to replace that as well. I’m not even going to bother going through that again. I ate the loss and bought a brand I frequently use. Not recommended.

Lo buena disposición con el dimer

This worked OK from January until May 2023 until it did not. It always had a light flicker to it when dimmed with a Lutron maestro mscl-op153m motion sensor dimmer. Direct replacement unit has no Flicker, lower dB hum and seems like it is a better individual unit. We'll see how long this one lasts.

Installed for over 2 years now and it dims very well with a Lutron smart dimmer, but this driver hums a lot using COB strip LEDs.

I have 2 of these driving 24v cabinet LED lights (one for each cabinet) and each one is wired with a plug and controlled by a Lutron caseta lamp dimmmer. I use a pico remote wall mounted across the room to control on/off and brightness. Works great.. no humming or feedback.. units get warm but not hot. If you are controlling the voltage from the input side like I am, make sure there is no other inline dimmer somewhere else in the chain on the output side or you will run into voltage phase problems (humming etc).

Après avoir acheté 2 transfo du même fournisseur, je suis tombé un peu au hasard sur le bon model de PLUSPOE. Ce model permet de varier l'intensité de façon fluide de 0% à 100%. Ce model répond à toutes mes attentes et j'en suis très satisfait - j'en ai même acheté un deuxième pour un autre projet dans mon bureau. Quant aux deux autres models - aussi de PLUSPOE - ils ont sauté et n'ont jamais fonctionné. J'ai donné 4 étoiles à cause d'un petit délai de l'ajustement du rheostat et la réponse de l'éclairage. I'm really happy with this particular model. It works smoothly and goes from 0% to 100% full intensity with no glitches or hesitation. The first 2 transformers that I ordered from PLUSPOE blue a fuse (exploded) and never worked at all, but this model was perfect for the 2 projects I needed it for. Gave 4 stars due to a very slight lag between adjusting the dimmer and lighting response.

This product replaced a 24 v non dimmable PSU for two under counter led strips. It worked for 3 months and then the lights started flashing. The original PSU is now back and working fine. There had been no response from customer support.

Seems like a decent quality product but only when used at full power. Any amount of dimming and it buzzes enough to be very annoying. I tried three different dimmers from three different brands all of them led bulb compatible. No luck. This pluspoe driver was still buzzing its little heart out. Ugh.

Just had my electrical inspection and these failed since they don’t have an approved ESA marking on them. Since it is over 30 days I can return them. $150 wasted