InWin Polaris Led Green Single Fan 120mm High Performance Silent Cooling Computer Case Fan with Anti-Vibration Mounting Cooling

The majority of reviews on the amazon page are for the case fans, not the case. The current overall rating for the product is misleading. I don't like doing negative product reviews, but this one was special because of how disappointing it is. After the rave reviews of the 101C and their other products I was excited for this...The case does not come with case fans. It's a cheap InWin case, but it's not a cheap case. If you weren't already planning on buying case fans, or had a few laying around, don't buy this case, or add on at least $30-40 for a couple case fans that don't suck.This case is deceptively difficult to build in. Mounting an AIO is not easy, and cable management is pretty tight with no rubber grommets, so be careful about crimping a cable around tight corners. If you have a full ATX motherboard, you may need to build directly in the case to deal with cable management, especially with the precariously positioned cable run on the bottom.The RGB controller would be better served as a button on the top/side, rather than a little dongle that you have to get crafty with to access when the case is sealed. The LED/SATA cable is also way too short.The 3.5" drive cages are shoddy - you have to fiddle with them to get them to lock properly.The aluminum case is really solid, but everything else about this case feels cheap. The fan/rad mount is cheap plastic, the 3.5" drive cages, even the brackets on the PCIe slots are pretty sloppy. I saw some mixed reviews on the ties that hold in the tempered glass panel for the 101C... and to anyone who decides to roll the dice - they're bad. I'm terrified the panel is going to fall out.It looks good, but that's about it. I'm not really sure why i bought this case or if I'm going to keep it. This product feels under engineered, and I should have spent more money on a better case.

I'll begin with the obvious, they are great looking fans with a great daisy chain design (the best on the market) that sync with Asus AURA seamlessly. Basically plug and play. My only gripe is that because they are quiet fans they have a maximum 1300rpm where the stock fans on my AIO have a 2300rpm. These make my system "look cooler" but run hotter. It would be 5 out of 5 if they could achieve higher rpms and have higher CFM's.System is i7-8700kDeepCool RGB AIONZXT S340 EliteASUS ROG 1080Ti4 InWin Polaris Fans.

I bought this fan because I had these criteria:- Modular- LED lights- 4-pin 12V LED connector- SilentFull positive points:- Fully modular and not requiring an external LED light manager is a positive for cable manager.- Many LED lights require a 5V 3-pin LED connector. This one is a 4-pin 12V which is great.- LED lights do look good and can be modified.The fan fulfills 3.75 out of the 4 points I was looking at. On the point of silence:- The fans ARE pleasantly silent in vertical position.- In horizontal position, due to sleeved bearing mechanism of the fans, a clicking noise can be heard which does go away at higher speeds. Unfortunately, this makes it so that my computer is overall a bit louder than it was before compared to my single Cougar CF-D12HB-W fan.The increased ventilation has helped to stabilize the temperatures on my PC managing higher workloads at lower temperatures.For the price, and the fact that these fans do not need an external controller, it is a decent fan. What could make this fan better?- I would expect high-quality fans to have a fluid-dynamic bearing system, similar or better at this price point. Sleeved-bearings are known to have reduced life-span when mounted in horizontal position.

Awesome well made case with plenty of room for full size builds and fans! This case does keep things cool, my only gripe with it is that it is very tough to manage cables with a full ATX board. Otherwise couldn't ask for more, I recently switched from an NZXT h500 and the only difference is that the h500 had better cable management. Would recommend

*Tinted window held on via 2 plastic push-pins on top and 2 slots at the bottom.*Open PCIe slot covers.*Easy swapping of HHD/SSDs using the trays. *RGB logo is addressable if you have an add_rgb header on your mobo, or you’ll have to use the included sata-powered controller.*Black side radiator mount/top trays/bottom legs are plastic, removeable, and easily paintable/plastidipped.*Dust filter only on the bottom, no fans on top means no dust will come in from the top.*310mm gpu length when used with a side radiator circumvented via a vertical gpu mount, allowing for a push-pull config if you opt for a slimmer bottom fan.*hidden gpu support bracket for long cards in the normal configuration.*White.*None of the corners, inside or outside, are sharp.*Plenty of space to jam wires in the hidden PSU compartment.-white, pretty much any defect on the case standout; the tolerance where the metal sheets fold to form a box is big enough to notice.-Near zero sound/vibration dampening, there’s enough space to add some weatherstrip on the ledges that the glass rests on.

Positives:-6 fan spots, put 3 on bottom for intake, 1 rear exhaust, 2 side exhaust-Thermals are fantastic with correct setup-RGB front logo-Easy unlatch for tempered glass-Looks fantastic-Solid build qualityNegatives:-Cable management is a bit tricky, especially with mATX boards-Lacking rubber grommetsCompared to my old NZXT H500 this is an upgrade 100%.

I bought this for a birthday present, and it took us a while to get all the pieces together for a new pc build, we finally got all of out parts yesterday after plugging in the CPU connection to the motherboard the fans didnt turn on. Obviously we thought it was the motherboard so we returned that and got a new one. We plugged everything in again and nothing. So it cant be the motherboard it had to be the case.We received dead wires on arrival.

First order arrived missing 1 part so I had to exchange it but the process was quick and easy, got my 2nd set the next day. These fans use their own type of connectors so you can't link it with anything else. I like that they are very quiet and sturdy. The plastic exterior helps give it a very nice glow as well. For the price I would have expected at least addressable LED's to give it more pop but the build is good quality.

Amazing quality. I use them with a Cooler Master cooler that comes with an RGB controller.*the RGB headers on these are Ground-R-G-B. care not to reverse them on RGBW headers, or use a controller instead

Pros- Works with Aura sync- Flat black cables with short and long length- Able to daisy chain together (great for cable management)- 4 pin adapter to connect another RGB fan or strip to header- SilentCons- The heads on the screws were too narrow for my case. I had other screws so I was able to install them regardlessI would recommend these fans to anyone that has the extra cash to spend and wants a little flare to their rig.

Replacement fans on my desktop computer. MSI Board supports RGB fans like this so can change colors to match your mood. Run quiet and can be speed controlled if your motherboard supports it.

Lo ventiladores son faciles de instalar sin problema alguno, muy silenciosos el RGB se ve excelente, lo unico negativo es que sus RPM son un poco bajas a las esperadas