Baby Proofing, Tables Corner Guards Baby Child Safety, 20ft(6m) Soft Bumper Strip Furniture Clear Toddler Edge Corner Protectors, Desk Edge Cushion

The Silicon edge guard is great for desks. We picked up a new desk from Office Depot that looked great online only to find they were not made of real wood. Rather its a very thin film with a picture of wood. Its glued to composite board. The wood would scratch super easy and the edges got nicked every time the chair hit the desk. We should have installed the edge guard as soon as we put the desk together. This silicon kit has everything you need to install the guard and its not exactly hard. But you do need to clean both surfaces, a steady hand putting on the double sided tape and a good eye to keep the silicon straight while laying it on top of the tape. I measured the silicon and cut it to size. After cleaning the surface I put on the tape slowly trying not to stretch it while going in a straight line - 6" at a time. Used the included plastic straight edge tool I flatten the tape against the desk getting as many air bubbles out as possible. Then starting at a inside corner I pulled 6" of tape off and using a steel ruler (to keep guard straight) laid down the silicon guard. When I didnt use the ruler - the guard went down with waves as I pressed it down. Once I finished attaching about 6" of guard on the tape I wiped a little WD40 on the plastic corner tool (to help it slide) and gently pressed the silicon down on top of the tape. That removed bubbles and made sure it made good tape contact. Even being careful the silicon somehow got stretched out a bit and was longer than it needed to be. I let it setup like that for a day before trimming it to the right size in case it decided to shrink back to its original size. My first edge didn't look great but the other edges came out much better once I got the hang of it. Hope this helps.

I bought this product for a window sill that my one year old was biting. I did put this product directly on the painted surface (not recommended per instructions!), however I was desperate for a fix to keep my son from biting off pieces of plaster. It works to protect the sill from my toddler (ironically not the other way around). I do expect it to peel off the paint when I remove it, but I have to repair the sill/wall either way from aforementioned toddler. The product is easily cut with scissors to fit and I could see many uses for it to protect wall corners from damage, table edges, etc. Do pay attention to surfaces it doesn’t recommend to attach to when purchasing this product. The adhesive is strong as it is meant to be and will peel paint up, but it is not hard to remove.

Do not use this on a painted surface. I used this product to prevent damage to my refrigerator door from a wall adjacent to it. I watched the video and read the instructions. The double sided tape was a disaster to use. Stuck to the packaging, stuck to itself while trying to apply it to the surface, and it resulted in uneven application. Once the bumper went on the wall, it looked terrible. Once I tried to remove it, it proceeded to remove the paint along with the bumper. Not damage free as advertised. Nothing on the description says to not use this on painted surfaces. Definitely look elsewhere or find a way to use a known adhesive that won’t damage surfaces.

This was a pain to put on until I realized that you had to lay the STICKY SHTUFF FIRST! On whatever surface you’re putting these on. Once they’re set though, they’re great. And look nice too actually.One thing though is if you really want them to stay..use the hell out of that yellow “spreader/putty knife” thing. And when I say use it, I mean, you gotta lean into it hard. It’s basically pressing out all the air bubbles while spreading the adhesive throughout.Great product though, love it.

It’s been a couple of weeks and so far, so good. I am not sure how it will hold up in the long term (whether it will yellow over time or lose adhesion). Time will tell. My biggest problem was with the adhesive method. It is in a roll and you need to apply it to the surface from the roll. The problem I had was that at points in the roll it was sticking to itself as I unraveled the roll and the glue would stretch itself out as it stuck to itself causing an uneven application on the surface. So you would have globs of glue in certain areas or areas where the glue would be coming out from under the protector. Since it is a clear protector, you can see all the imperfections of the adhesive even once completed. So it looks a little sloppy. With that said, so far, it is doing its job giving me the protection on the edge of the countertop I applied it to now. If only they could prevent the glue from sticking to itself in the roll, I would probably give it 5 stars.

Have a toddler? Get this. It cushions every edge. Our little guy is basically a WWE wrestler and jumps off every surface and tends to land on things. This protects your furniture and your little one. Does not damage wood or any other sirfave. We have this on our kitchen cabinet handles , on our coffee table, on our bench … lol basically everywhere. It’s squishy and protects all.