12V 2A Power Supply AC Adapter Replacement with 8 Tips, Regulated 12 Volts 2000mA Cord Charger for LED Strip Light, CCTV Camera, GPS, Webcam, Router, BT Speaker DC12V Transformer (6ft)

This product is so great! It has tons of adapters to fit many different plugs that you may have. It seems to be well-made and the cord is a good length. So far I’ve used it and it works wonderful.

I had a device for my home Audio/Video switching that used an external power supply and one day it just stopped working. Luckily I was able to swap it out temporarily with another device, so I was certain it was just a dead power supply. So I ordered this as a replacement for my dead power supply. When this came, I was very happy with the results, as it worked perfectly as a replacement power supply. Plus all the extra features of this power supply makes it a perfect unit for a variety of 12V devices. First, the most significant physical feature is that this power supply is narrower than the typical wall-wart type of power supply. This is excellent as it does not prevent use of adjacent outlets in power strips. Second, is that it comes with a variety of adaptor plugs that makes it easy to use this power supply with a wide variety of devices that might have a power connector of a different style/size than the standard one. These two features alone make this a perfect replacement power supply. So much so, that I ordered another in order to have a couple spares on hand now. Note: for those not familiar with power ratings, you can use this on any device that says it requires 12V DC power. This power supply is rated for up to 2A (two amps). This means you can use it with any device that requires 2A or less. So if your device says it needs 0.5A, this power supply will work fine with it. The capacity of the power supply must be higher or equal to the current the device needs. Also, note that if your device says it needs are in milliamps (mA), then the equivalent is multiplied by 1000. Thus the capacity of this in mA would be listed as 2000mA. So a device that says is uses 850mA will work just fine.

Delivers 11.7 V at 2.0 A while drawing 27.6 W from 122 VAC. So the efficiency at spec load is 85% which is not bad, and the 4.2 W dissipated as heat isn't excessive. It does 12.0 V at 1 A (13.8 W, 87% eff) and the no-load voltage is 12.1 V, where it draws only 0.3 W from AC so not too much "vampire" drain. All these things indicate a good design.

I bought this as a replacement power supply and it has been working exactly as expected. I needed something reliable and compatible, nothing complicated. First impression: it feels solid and well made. The cable length is good, and the connector fit perfectly with the device I needed it for. I’ve been using it regularly, including in a church setup, and it has been stable with no issues. It powers the equipment consistently without overheating or cutting out. What I like most is that it does the job without any problems. Plug it in and it works — which is exactly what you want from a power adapter. The only downside is that you need to double-check compatibility before buying, especially voltage and connector size. Overall, it’s a reliable replacement adapter and worth the purchase if you need a dependable 12V 2A power supply.

Worked as intended.

Didn’t work the way I wanted it to but worked a different way…

Worked for my EFX546i Elliptical. Charging 12V12AH battery.

I bought this power adapter about three months ago for my desk lamp. It worked fine at the beginning, but the quality turned out to be very disappointing. After about three months of normal use, the adapter started making a loud buzzing/electrical noise. Soon after that, it began having connection issues — the light would flicker on and off whenever the cable was slightly touched. Now it has completely stopped working and shows no response at all. The build quality seems very poor. An adapter should last much longer than just a few months under normal household use. I would not recommend this product due to its short lifespan and reliability issues.

Works as designed

Working perfectly for multiple pin

Perfect! The power cable for my Belkin Boost Wireless Bluetooth Speaker and Phone Charger Stand store working. I didn’t want to just toss the speaker. Searched for a replacement and found this item! One of the tips fit the speaker jack perfectly!! I am so pleased.

gets warm (not hot) at full draw

Great price and works for my needs charges my cold lasers