Power Up Your Devices! ⚡
The EEMBLithium Polymer Battery is a high-performance 3.7V rechargeable battery pack with a 150mAh capacity, designed specifically for devices requiring a Molex 1.25mm connector. Weighing only 2.8g, it offers reliable performance with built-in safety features, making it ideal for a variety of applications including Bluetooth speakers, dash cams, and smart home devices.
| Battery Cell Type | Lithium Polymer |
| Recommended Uses For Product | Indoor/Outdoor |
| Item Dimensions | 0.69 x 1.26 x 0.17 inches |
| Item Weight | 0.01 Kilograms |
| Battery Weight | 3 Grams |
| Unit Count | 1.0 Count |
| Reusability | Rechargeable |
| Battery Capacity | 150 Milliamp Hours |
| Amperage | 150 Milliamps |
| Voltage | 3.7 Volts |
S**V
Awesome battery for a good price!
Product works as intended for a good price. Needed it to replace a dongles battery I had. Charges quickly and lasts me a few days. Thank you!!
S**E
Best lightweight batteries
If you need to make a light weight electronic these batteries last a long time. They are small and fit any build. They cost nothing and are very beginner friendly.
D**A
Exact Fit and great price
Battery fit perfectly and provided the correct voltage for my equipment.
7**S
Dashcam LiPo Battery
I bought 2 of these batteries to replace the failed batteries in my 2 ten-year-old iTrue dashcams. Had to cut off the connectors that came with them, strip and tin the wires, and solder the ends onto the pads of the old batteries. The new batts are a bit smaller than the old ones but they have the same amperage/voltage rating and they worked! Solved all the problems I was having with saving videos to my micro SD cards.
J**B
Baf
Worked once and failed
S**N
Perfect fit to repair Old Shark dash cam
The battery failed in my 5-year-old Old Shark dash cam. After prying it apart (you need to remove a couple of screws too, one hidden under an inspection label) I saw that the old lithium polymer battery was puffy. Bad, bad, bad. This new battery arrived in a day. Perfect size. I was planning on cutting off the connector because the battery is soldered to the circuit board. Instead, I carefully cut the plastic tab holding each connector pin inside the connector housing and extracted the pin. I soldered these pins directly to the circuit board. They stiffen the wires so they won't accidentally short out.
A**R
Worked perfectly for FIIO E6
I had an old headphone amp with a swollen battery and the EEMB worked perfectly. I cannot comment on battery life or longevity yet, but so far I am very happy.
T**E
EEMB Are High Quality It Seems
Previously bought an EEMB for my MecArmy SGN3 flashlight 7mos ago and it still gives full run times...12+ hrs on low. The original and a cheapy, about $5, didn't last 5mos. This one went into a VanTrue N1 Pro to replace the original. These definitely seem to be a quality battery.
Trustpilot
Hace 3 días
Hace 3 semanas
