ZEKOO 9FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Barn Door Bypass Hardware Kit, Flat Track Roller, Low Ceiling (J Shape Hanger)

Worked great to build sliding barn doors for my large closet. Rolls smoothly and looks great.

Was easy to install and worked perfectly for me

This hardware worked out great. It's very heavy duty and made well. We converted used sliding shutter patio doors into barn door sytle. I bought the 9 ft single bypass track and my opening is 8 ft wide, each door is 48" wide. The only small issue was the bolts that are used to mount the bracket to the doors were too long for a 1 inch thick door. The company mailed me shorter ones very quickly and for free; however we were so anxious to start the project, we went out and bought shorter bolts. Since we had to remove casing/a frame from the old shutter doors that came with the house, we had to install new casing around the patio door opening. We used left over 5 3/4" baseboard that our flooring installer gave us. It worked out perfect. Thanks to other reviewer pictures and tips to give us the idea. At minimum we had to mount a board at the top to ensure at the end, the rail was mounted into studs. Because we initially did not plan to put these doors up as barn door syle, they hang a little higher but my husband was creative on making a tall enough door guide. He mounted the door guides that came with the kit onto a block of wood and it's also working out fantastic. It's a must to use a door guide for our doors because the weight was pushing them inward. I also bought the handles off Amazon too.Tips: Don't use the anchors, install into studs - you might need to mount a board up to make this happenBuy shorter bolts or pre-order from the company ahead of time if necessaryTake your time, measure carefully, read the directions carefully and look at the pictures. Trust the measurements they provide and look at the pictures because those help with making sure which is front, back, top or bottom to certain pieces. Make pilot holes first to prevent splitting. We also used masking tape to plan where the holes where go.Cons: bolts too long, but easy fixOverall this project took us a couple days due to prep work. If no prep work needs to be done, I would say installing the kit is a couple hours work.

All hardware is just as described. Solid and went together easily. The instructions are very vague and if your not somewhat mechanically experienced this could be a struggle. I made my own doors and they were each close to 100lbs. The hardware carried them easily as it was rated to. Good product just not thorough instructions. One pitfall with the door stops, the very outside rail bolts are a few inches from the end of the rail. The door stops slide onto the end of the rails and must go inside our outside of these bolts. If you need them to be where these bolts are you'll need to modify them in a way that is not described in the directions. I drilled and tapped them to put a 1/4-20 bolt in the stop that I could screw in or out to the position I needed. See attached picture.

It was really easy to install. Is sturdy and looks great.

Great door hardware, easy to install

Good quality. Holds very heavy doors

This item is exactly what was advertised, it is easy to assemble and install. It is working great for me

The media could not be loaded. This is exactly what I was looking for.This barn door rail is of great quality and was super easy to install.And looks fantastic!

The product seems to be very sturdy and runs well on the rollers. Only problem being we should have had larger doors as the overlap is 6”.

Hardware was decent quality with only a couple of issues. The method used to attach the two sections of rail leaves too much play creating a situation where incorrect marking of attachment points may result. One of the hex screws used to hold one of the brackets was faulty and needs replacing. Also, there is a lot that is missed by not having a proper translation done for the instructions. They’re close, but as they say, the devil is in the details.Lastly, it would be very helpful to know what the proper positioning for the hangers would be for different sized doors so that when fully opened, they cover the opening completely and evenly.Our closet has a 48” opening and knowing these details (as well as what the ideal door sizes for other closet sizes) ahead of time would have saved me a lot of frustration, time, and effort in modifying my doors.UPDATE:Customer service were quick to reach out and offer a solution. The parts were replaced within 24 hours and I will be able to make the necessary adjustments.Well done, Zekoo Hardware!

Door hangers as described. Easy to follow instructions and no extra tools to have to purchase to complete. Happy with result as smooth operation.

This product has only one issue, the way that the rails join could be much better, it was pretty flimsy. Previous rails I ordered had a zigzag edge which made the join more smooth and a much better fit.