Motorcraft WPT688 Blower Motor Connector

This item did not have the same part number as I ordered. I looked up the part number that was sent to me and it supersedes the part number I ordered. In fact the part sent to me actually costs about $60 more than the connector I paid for. It fit perfect and works perfectly as well. No more intermittent blower and having to hold the plug just right with my foot. Great item at an incredible price, I would buy again and would most definitely recommend this item and seller.

Fixed the ac issue I had in my 2013 Ford f150. Dealer told me I needed a whole new harness. I tracked the issue down to a single wire that would cause ac to stop working when I hit a bump or moved.After removing the connector I found a melted connector on the plug. If your having the same issue, save your self 100s in dealer fees. It's a simple fix that can be completed with minimal tools. I was able to replace the plug in 10 minutes taking my time. I would strongly suggest doing one wire at a time to avoid mixing up. The connector plug can be found behind the glove box.My only complaint is the item doesnt ship prime. Took about a week and just happened to be one of the hottest weeks of the year.

Superior replacement for stock unit.

The whitt tt e wire was pretty small compared to the others on my 2015 navigator

Vehicle: 2015 Ford Expedition EL Platinum with dual climate control.Had a loose wire that would stop the fan from turning. Had to wiggle the wire to get it working again. Tried to open the connector and release the problem wire to fix it that way but couldn't figure out how to get the wires out after removing the locking clip.Anyway, I decided to order this part on Amazon given the reviews. Despite that it says it doesn't fit my vehicle. It is a perfect fit to replace the connector under the passenger side glove box. This connector I believe goes to the blower motor resistor.The butt connectors that come with this item are small. I didn't try to use them, I just soldered the wires together and used the shrink tubing that came with the item. There is a good amount of wire provided with the connector, I decided to not cut it away and instead just used a zip tie to hide the excess after installing.The picture I'm attaching is the original connector that was faulty.Worth noting that this part is available at Ford Parts for about the same price, searchable by part number: WPT688 OR WPT1591

This wiring pigtail part fixed the factory connector for the blower motor fan speed controller in my wifes 2013 Ford Flex. Its located at the firewall, under the passenger side dash, behind the plastic trim cover thats held in my two push-fit clips.The issue was the ground wire BLK/BLU, the wire on the far right on the connector when its plugged into the speed controller and installed. This wire on the factory harness had shorted out internally and the connector was melting and the ground wire was getting very hot and melting the insulation. You can see a small blob of melted plastic inside the connector in the picture.I cut the old original connector off, and soldered and heat shrunk this replacement pigtail on. Right away, I could tell it fixed the issue, as the ground wire (the far right wire when looking at connector plugged in, under the passenger dash), was not hot anymore and front blower fan was not intermittently cutting out. This also could cause a fire in the vehicle.

Installed on my 2014 ford 150 fx4 5.0l, old connector was melted a little along with the blower motor reeistor, so installed this connector and a new resistor. Everything works as it should now.

Glad I paid a little more and upgraded to high quality item that will last.

I installed this after a connector melted on my 13 f150. Works perfect and better quality than stock.

good quality, in original Motorcraft packaging

Worth the money,cheaper then from the dealer.

A good replacement part. I did note that the conductors in this part are smaller than the original, which overheated. Small wire, high current equals heat and problems.The insulation on the wire of the new part is a better quality, I don't foresee it breaking down too soon.

Super easy to install. After spending over 500 dollars on other parts, it turns out that this is what I needed. Saved me from buying a new truck.