TechDiamondTools Diamond Polishing Compound Polishing Paste USA Made 50,000 Grit 0-0.5 Microns for Marble Glass Metal Rock Jewelry Resin Silver Chrome Gemstone with 25% of Diamond Powder

I purchased this to polish the plastic face of my Timex watch and remove the scratches. Seems to work good. The product came with a fairly good amount for the price. I had purchased polyWatch before and I do like that product also but it seems like TechDiamond lasts a bit longer. Depending on the depth of the scratches, different grits are better. The 50,000 grit that I ordered is for finishing. I would order this again as needed. As always, my review is based on my experience and I have no connection with this seller.

I used this to polish a tungsten carbide wedding ring that had dulled to a completely matte finish over the years. The end result was a perfect mirror finish just like it was when new. It took a little practice to get the buffing technique correct using a dremel tool with a polishing wheel. With a little patience I was able to get it down. The tube has plenty of product for this application. A little bit goes a long way, though you should regularly apply small dabs while polishing to ensure the material is present and hasn't been completely wiped away by the tool. Took me about 45min of slowly working the surface of the ring with the compound, then cleaning it off, and starting over again until achieving the level of shine I wanted. Some tips: keep the dremel speed low, wear eye protection and clothing that you don't mind getting dirty as the material will spray off of the buffing wheel. It helps to apply with a finger first since the diamond paste is thick and hard to spread with the dispenser tip alone. It doesn't take much to do the job, but you don't want to let the surface being polished to get dry. Bottom line: this product works well (provided you have the patience to use it properly). Tube looks small, but it will last many years for small polishing jobs like cleaning rings and scratches. Will purchase again if needed.

This diamond paste works wonders. When you grind carbide and it has to have a high level polish, this is a reliable paste to use. Once you have the right brush, and apply this paste, you can achieve the finish required. You need to set all your parameters to the correct RPM, depth your product goes into the brush, the RPM of the tool, the RPM of the brush and the length of time they all come together. If you go too far with any of these parameters you’ll find this paste can render a shape out of tolerance. Five stars for this paste!!!

Worked really well to get the scuff and small chips from my insta360 x3. Light buffing with a felt pad but for the drill. Maybe 5-10 each lens. 2 before and 2 after pics.

I make rings and other small metal works, and I often put the final polish on them by hand or using a lathe. For a long time, I was using just the solid polishing bars - and while they work well, I have difficulty repeating results, it's always a little trial and error. I purchased this to test as an alternative. I am quite happy with it. Just a tiny amount - the size of a grain of rice - is enough to polish a surface about 2" in diameter, and probably larger. It spreads very easily by hand and can be polished similarly easily. I noticed that unlike many other polishing compounds, you can hardly feel the grit in this one at all - it's that fine. I put a final mirror finish on a copper alloy disk (after initial work had been done) in about three minutes by hand using this paste. It's the first time I've used a syringe to apply polishing compound and found it quite easy to control. I found that it didn't really work on aluminum or resin, which I found disappointing. It is possible they were both too soft for this kind of compound, I couldn't really get the ultra-smooth reflective surface I wanted out of them, even after a subsequent waxing. On copper and bronze, though, it works beautifully.

No sé si no lo sé usar pero para mí no funcionó

This paste helped me polish my sword to a mirror sheen and removed all the rust. Takes a bit of scrubbing, but it almost miraculously solved all the issues I had with my sword in a few minutes. Well worth the money!

Ok

Utiliser pour le polissage final de bijoux en argent. Très bons résultats.