Eono Fixed TV Wall Bracket for Most 26-55 inch TVs, Ultra Slim TV Wall Mount with VESA 75x75-400x400mm for Flat Curved TVs up to 45.5kg, Fischer Anchor and Spirit Level Included

I upgraded my main TV but wanted to move the replaced set into another wall - so needed a second mounting bracket. This one came recommended on Amazon and was a very good price. It arrived next day and took less than 30 mins to install and I’m very pleased with the purchase. The materials are very sturdy, the rawl plugs and bolts that are supplied with it are of good quality and all you need to add is a big screwdriver and a 12mm socket and you’re away. Some tips:1. Fit the upright brackets to the TV first so you can get the positioned correctly. This lets you see how central the brackets are and to translate this to the position you want to achieve on the wall.2. Measure twice and mark carefully before fitting the wall plate. The holes for the rawl plugs need a 10mm masonry drill bit and you don’t want to be drilling those in the wrong place if you want the TV to be level…3. You’ll need a 12mm socket or a spanner to fully screw the bolts in through the wall plate. There is some flexibility in the wall plate if the holes are a few mm out, but not too much so make sure of the small spirit level (included) to check before you full tighten the bolts.4. I liked the idea of the spring locking clips to hold the TV in place once it’s mounted. These can be adjusted for length so they don’t dangle down too much - and it’s easier to adjust them before you hang the TV. The bottom clips are held in place by springs, so it is possible to release them and hold the weight of the TV on the top brackets for a short while while you plug the power / HDMI / USB etc… leads in. However, it is probably a good idea to attach the plugs to the TV before you hang it if possible. It’ll save the hassle of manipulating the TV position whilst you do it.5. The bracket is easily strong enough to hold my 46 inch TV without worrying about it. Fitted into brick with 2+ inch bolts - that sucker isn’t going anywhere….6. Finally, whilst this is a job you can do yourself, don’t be a hero if you’re not too confident. Having someone with you to hold the TV whilst you position it could save an embarrassing insurance claims.Enjoy…

This is the forst TV wall bracket we have ever bought and we were not disappointedRight from opening, you can tell that this is made with strong, good quality materials and this gives you confidence when using it to hold your TVIt comes with all the screws and bolts and plug fixings you need and is relatively easy to install following the clear instructions providedThis is a fixed flat model. So, it won't extend your TV outward or tilt on an angle. But, it does keep your TV very flat to the wall and looks great!The included level is a joke. Do not use it or chances are your TV will look wonky. Use a proper level and get it right. Trust me, it's worth itGreat TV bracket at a great price. Would recommend

Fits well on the wall. Comes with all the right screws. I have a 50 inch and works well. I will be buying again for the next tv. Very slim and doesn’t stick out too much

Good size, ease of use, looks good, weight is perfect for hanging TV

Bought this to hang a Sony KDL-55W955B on the wall. Easy to attach to the TV - providing you have the adaptors - which usually come with the TV... that you throw away because you never envisage that one day you might want to hang this on a wall... so had to buy them again. This wall mount does come with several bolt types as well as washers and spacers so you will be hard pushed not to find a suitable fixing.It's pretty easy to align. Comes with a little magnetic spirit level... but if you have something more accurate such as a laser level, use that... or you could just 'eyeball' it... but I would recommend getting the bracket as aligned as dammit as there are no adjusters on the arms to level it like you get on some TV mounts.It's fairly easy to attach to the wall. I used a 10mm masonary bit on our wall which was spot on for the supplied Fischer wall plugs and screw bolts. Definitely worth using a socket wrench to do this.And then the TV hooks on with a reassuring click to lock it on. The are pull cords to release and it has enough lift to allow you to plug in cables without fear it'll fall off.Overall, I'm quite impressed with this. Good value too.

Personally I was dreading fitting my first wall mounted TV bracket I am I old school and remember the days when TVs had huge box and weighed a tonneNow that’s all changed they are much lighter and slimmer so I wanted to free up some space and went for the wall mounted bracketBox contains everything you need apart from a screwdriver and drill bits oh and drillI was quite surprised when I saw all the help and templates even a tiny spirt level as no one wants to look at a wonky wall mounted tvSo to help you install this bracket a few suggestions that I found to make it an easier processFirst you will need a masonry drill bit set and more than one drill bit as the final size hole 🕳 for a concrete or brick wall is 10mm and quite deepStart off using a smaller drill bit and go through 3 or four sizes building up to 10mm I personally used a cordless drill and only took 10 minsThe bolts you use are 12mm and do have a screwdriver slot in them it’s ok to get them half way into the raw plug with a screwdriver but starts to get tight so you will need 12mm spanner or socket set to tighten all the way upWhen it’s fixed in place it’s so easy to hang the tv as the brackets you put on the back are just 4 screws and have a slot to drop the into the wall mounted bracket at the top and 2 spring loaded corded clips at the bottom so drop into the slot and pull the 2 cords to clip into the bottom and job doneOne last tip remember to fix all your cables in before hanging the tv and have no fear this bracket will take some weight it’s solid and will be still on the wall long after I have goneHope the information has helped