SPACEKEEPER Workbench Casters kit 660 Lbs - Retractable Casters Heavy Duty Bench Caster Wheels Designed for Workbenches Machinery & Tables, 4 Pack

I constructed a heavy duty lathe workbench from Fir 4 x 4s and 2 x 4s plus two layers of 3/4” MDF for the top. I selected the Model 3000 Premium Workbench Casters primarily for their retractability, weight capacity of 660 lbs heavy duty construction and designed around 2.5” wide legs or greater. The Casters were easy to assemble but I would recommend assembling one first to understand the design. Included with the parts were two wrenches for tightening nuts & bolts however I also used a metric socket set as well. The Easy-Install Template is a snap to use and accurate. I used Frogtape to draw center lines and hold Template in place on the legs because the legs were finished. Since my 4 x 4 legs actually measured 3.5” sq. I was able to use the 4 corner holes. With Template in place I used a center punch to locate the holes precisely through the Template. The Wood Screws included with the Workbench Casters were a disappointment. The Phillips heads were easy to cam-out despite a new driver bit and clutch setting of the drill driver. I opted for a heavier #10 x 1.5” Drill Screw with 5/16” Hex Head and continued driving screws with nut driver bit. I found it much easier to attach the Leg Mounting Plate to the bench leg first, drive in the screws and then assemble the remaining caster parts because the 5/16”Hex Head required more space between the Pedal Bracket Assembly and Leg Mounting Plate. Your choice. The Movable Pedal of the Workbench Caster has a cam like bottom edge that exerts considerable force on the Wheel Mounting Plate when pushing down to elevate workbench. I noticed a metallic rubbing sound on one caster assembly. I applied a fine bead of white grease to the bottom edge of the Movable Pedal to lubricate that mating surface. The Model 3000 Premium Workbench Casters are well made, function exactly as designed and compliment my lathe bench. The completed workbench and lathe weigh in at 256 lbs well within the capacity of the casters. It’s possible for me to elevate the workbench and move it away from wall for cleaning.

Works just as described. Instructions are barely usable, but it’s fairly easy to figure out. Lifts my heavy workbench with ease. Highly recommend.

Overall well build, directions, easy to read. And they work as they said

These wheels worked prefect for the stage prop I built. Putting it on and off stage is easy and much better than using a dolly. Will definitely buy again. The instructions were perfect for getting the placement right.

Great, sturdy coasters, easily to lock and unlock . Smooth swivel. Easy installation with necessary screws, bolts and ranges included in each kit.

Even though these casters look small. They are excellent! The bench I mounted them on weighs around 500# They work great!

I wanted to like these but in the end I really don't. Installation was easy and they roll and swivel just fine. What I don't like is that they stick out really far and when you retract them the wheels will sometimes be turned in a direction where the bench will not drop all the way to the floor, maybe 1/8" off the floor. I have to turn the wheel(s) by hand or move the bench a bit to get the wheels to rotate so the bench will sit on the floor, then it's not exactly where I wanted it. When I have time, I'll try installing them a bit higher up the leg than the instructions say and see if that helps.

These worked amazing. Easy to install and use. Definitely recommend them.

roulettes ideal pour bouger un table de massage tres lourde , le systeme le levier est tres bien pensé et cela se fait sans aucun effort. je recommande fortement

I purchased these retractable castors to add to a large workbench I was building for my garage. The casters didnt disappoint. They are extremely well made and cope very well with the weight of the bench. They lift the bench with ease and its a breeze to move it around the garage on the 3" wheels I cant recommend them highly enough and wouldnt hesitate to buy them again

My order came quickly and included all the necessary parts - even tools. I mounted the 4 casters on the twinned 2x4 legs of my workbench. The bench is heavy - made up of double 2x4 legs and stringers and a solid core door for the work surface. The instructions were clear enough to figure out. It will be interesting to see if the mounting screws will hold the weight of the bench over time or eventually loosen and tear out. Keeping the casters in the "up" position will at least keep the weight on the legs where it belongs and not on the casters and their mounting screws....you just have to remember to tip the casters up. The casters roll the weight of the bench really well and saves me from walking the bench into position by moving one end, then the other.

I have these wheels under my workbench which is 200+kg. It so nice to be able to lift and move it on my own. The wheels were very easy to install and run smoothly. The only problem I have with them is that they stick out quite a lot, even when retracted. I often hit my toes against them when I walk around my bench. If there is space for the wheels (and your foot!) I recommend installing them on the inside of your bench.

excelente producto. cumple a la perfección su función