Geeetech Silk PLA Filament 1.75mm for 3D Printer, Metal-Like Shiny 3D Filament 1kg (2.2lbs) 1 Spool, Dimensional Accuracy +/- 0.02 mm, Metallic Silver Silk Filament

I’ve been really impressed with the Geeetech Silk PLA filament. The metallic gold finish looks fantastic right off the printer, with a smooth, glossy shine that gives prints a premium, almost metal-like appearance. The filament feeds consistently with no tangling or clogging, and the dimensional accuracy is spot on. I’ve had clean, detailed prints with strong layer adhesion and minimal stringing. It’s also been very easy to work with, even on longer prints. Overall, this is a great choice if you’re looking for a reliable silk PLA that produces eye-catching results without a lot of hassle. I’ll definitely be purchasing more colors from this brand.

I’ve been 3D printing long enough to be picky about filament, especially silk PLA, and this Geeetech Silk PLA in Gold completely exceeded my expectations. Right out of the box, the gold silk color is excellent — rich, glossy, and consistent without looking cheap or overly yellow. Once printed, the finish has that smooth, reflective silk sheen you want, and it really makes decorative prints, accents, and display pieces stand out. Layer lines are visually minimized, which is exactly why I reach for silk PLA in the first place. Packaging was another pleasant surprise. The spool arrived airtight sealed with desiccant, which tells me the seller actually cares about moisture control. That’s especially important with silk PLA, and it showed during printing — no popping, no stringing from moisture, and no surface defects. One thing I noticed immediately was that the spool looked slightly smaller than most others I’ve used. At first I was a bit skeptical, but once I weighed it, it measured out exactly as it should. My guess is the filament is wound more tightly or is slightly denser — either way, it’s honest labeling and full weight, which I appreciate. For printing, I’m using a Bambu Lab P1S with a first-generation AMS, and I kept things simple by selecting the Generic PLA Silk profile. I didn’t need to tweak a single setting. The filament fed perfectly through the AMS, adhered well to the build plate, and printed flawlessly from start to finish. No clogs, no under-extrusion, no weird surface artifacts — just clean, reliable prints. Overall, this filament delivered on every front: appearance, packaging, print quality, and reliability. It’s rare to find silk PLA that looks this good and prints this easily without tuning. I’ll absolutely be buying from this seller again, and I’d recommend this Geeetech Silk PLA to anyone looking for a high-quality gold filament that just works great!

This Metallic Royal Blue is stunning. It has a true 'shine' that almost looks like anodized aluminum. It printed perfectly on my K1 with zero stringing. Layer adhesion is great and it hides lines well.

I am really impressed with this Geeetech silk gold PLA. I grabbed it on a whim for a Christmas tree star and it ended up looking way nicer than I expected. The color is a rich metallic gold that actually looks like a real ornament, not cheap plastic. In person it has a smooth shiny finish that catches the lights on the tree perfectly. I printed a big five point star with long thin tips on my Flashforge Adventurer 5M and it handled the geometry like a champ. No clogging, no weird jams, and the layers came out clean and consistent. The sharp tips stayed solid instead of going mushy or curling up, and the layer lines almost disappear once the light hits the silk finish. I did not have to fight with the settings much at all. Once I dialed in a reasonable temperature and speed it just ran and finished the whole print without drama. Adhesion to the bed was solid and the part popped off clean once it cooled. If you want a gold filament for decorations, cosplay pieces, or anything that needs that bright metallic look, this stuff is absolutely worth it. Easy to print, looks fantastic, and I would happily buy it again. Five stars.

Unlike the listing photo, the color I received is tan. Maybe real bone can become that color at some point or under different conditions, but this pla is definitely not a shade of "white". The filament itself is fine. Printed well out of the box just using Bambu Lab's profile. Spool seems wound fine. Listing shows cardboard, but came with plastic. Smaller than BL spools; should work in the AMS. Happy with the filament, but it's not the color I ordered.

This PLA was beautiful, no stringing, printed flawlessly. It does not fit on my AMS rods on my flash forge ad5x. It sits on them very loose but it still pulled the filament through and printed amazingly. I printed the ice cream cone part of this print with this bone filament.

The photo - both knob and accent are this filament. This metallic silk filament prints very well. I got the three pack of Gold/Silver/Copper .5 KG spooks. Be warned, these .5 KG spools will not work in a Bambu AMS, and no spool adapter will correct it. You would need to completely re-spool it. The spool is narrow, and therefore the windings of the spool sit directly on top of the feeder. It made a multi-color print a real pain. I should have just purchased a full KG of filament for this reason alone, but I only wanted it as an accent color on a much larger print. If they wanted to make it AMS-compatible, they could widen the spool to a more normal width and then enlarge the center to make the roll appear "full" with the .5kg on it.

When it prints right it looks great! I have printed many awesome things with this first try. Only issue is it seems slightly too brittle and hard to print for any fine detail prints which is a shame since I planned on using the gold for small halos on top of an angel figure. The best print i got has a variation in thickness of 1mm which is alot But that geometry without supports isn't super easy for any filaments. It doesn't have the best layer adhesion, i brushed the one in the photos slightly too hard and the halo broke off towards the bottom where i ended up superglueing it back. The Halo was maybe twice the thickness of spaghetti but even easier to crumble. Definitely not an amazing filament for printing small details like a halo but great for ones without the small details The photo of the angel is after doing every calibration print I could, making sure it was completely dry and probably my 10th-15th try, which was my best one BTW Geeetech is an amazing company though that cares about its customers and providing the best products, they contacted me on their own terms about my struggles with printing the halo and listened to my feedback. They passed along my concerns to the factory where they will see about fixing the issues i had and ensure they are selling the best products they can as well as made sure they did everything they could to compensate me for the trouble i had with the filament without me having to ever ask. you can trust that if you order from them they will do everything they can to make sure your experience is good so you don't ever have to worry when buying from them.