The Invader mounts directly onto your detector and becomes an integral part of it, operating off the detector's power source and utilizing the detector's functions, such as target ID, discrimination, depth (although due to the difference in size of the two coils, depth readout is not accurate), and pinpointing. Basically a second coil to be used at your command with the flip of a switch, it consists of a small control box that mounts under the shaft directly ahead of the detector control box and sports two toggle switches. One toggle switches from the detector coil to the probe, and one for changing from the Ace detectors to the GTP and GTAX detectors when mounted on same. The other part is a 6 1/2" long, 1" diameter probe that snaps into two clips mounted directly in front of the arm cuff. Once it's installed, you just connect the coil cable to the Invader control box, and the Invader cable to the detector control box, and you're up and running. The additional weight is not even noticeable, and balance is not affected.
Trustpilot
Hace 1 semana
Hace 1 semana
