MXBAOHENG 99.96% Pure Nickel Sheet Ni Metal Thin Plate 1mm x 100mm x 100mm

The quality of your nickel plating really comes down to surface prep and controlling your current flow. I previously used 99.6% nickel which left more black debris in the solution, but literally made no difference to the quality or appearance of the final finish. the advantage to this product is not that it's more pure and less contamination, but that it's thick and therefore lasts longer. I had previously used the very thin nickel strip on a roll. It's thin like foil and no matter how you fold or ball it up, it quickly disintegrates where it enters the solution and falls off, which breaks your circuit. For this thicker sheet, cut off a strip, drill a hole in the top and hang it from a copper wire, making sure the copper wire does not touch the solution or you'll contaminate it through the anode's reaction. If you don't have a power supply where you can control current flow, just remember more anode surface area you have touching solution, the higher the current flow. Too much current flow and your nickel surface will form too fast and be rough or look like tiny craters. Not enough current flow and the plating takes too long. Error on the side of slow.

Used this as a shim in a custom knife build. This nickel sheet was exactly what I was looking for. Forge welded easy and polished brilliantly. Will definitely purchase again.

arrived exactly as described. It met my expectations in terms of thickness, size, and purity.

Worked for I wanted, but left a copper residue on the plated parts that took a lol of time and proved difficult to buff off.

At least 4 plating anodes in this sheet.

The nickel was as described and worked for electroplating as intended. I would purchase again.

It's a pure nickel plate, 1 x 100 x 100 mm ...'nough said.

The material was good to the specification size. But the composition seems not right. It started to oxidize in ambient storage after three weeks